1, the working pressure range is wide, different pressure regions can be obtained by selecting different types of pumps, and the input air pressure and output air pressure can be adjusted accordingly. It can reach extremely high pressure, 300Mpa for liquid and 90Mpa for gas.
2. Wide flow range. All types of pumps can work smoothly as long as the air pressure is 1Kg. At this time, the minimum flow rate can be obtained, and different flow rates can be obtained after adjusting the intake air volume.
3, easy to control, from simple manual control to complete automatic control can meet the requirements.
4, automatic restart, no matter what causes the pressure maintaining circuit pressure to drop, it will automatically restart, supplement the leakage pressure and keep the circuit pressure constant.
5, safe operation, gas-driven, no arc and spark, can be used in dangerous situations.
6, the maximum energy saving can reach 70%, because the pressure does not consume any energy.
Extended data:
Precautions:
1, air compressor should be parked away from steam, gas and dust. The air inlet pipe shall be equipped with a filtering device. After the air compressor is in place, it should be wedged symmetrically with a cushion block.
2. Always keep the outside of the storage tank clean. Welding or hot working near the gas storage tank is prohibited. The gas storage tank is subjected to water pressure test once a year, and the test pressure is 1.5 times the working pressure. The barometer and safety valve should be checked once a year.
3, the operator should be specially trained, must fully understand the structure, performance and function of air compressor and ancillary equipment, familiar with the operation and maintenance procedures.
4, the operator should wear work clothes, lesbians should be woven into a work hat. It is strictly forbidden to operate after drinking, do not engage in anything unrelated to the operation, do not leave the post without authorization, and do not decide to replace the work by non-local operators without authorization.
5. Before starting the air compressor, do a good job of inspection and preparation according to regulations, and pay attention to opening all valves of the air storage tank. After the diesel engine is started, it must be heated at low speed, medium speed and rated speed. Pay attention to whether the readings of various instruments are normal before operating with load. The air compressor should be started with increasing load gradually, and it can only run at full load after all components are normal.
Baidu encyclopedia-hydrogen compressor