Current location - Health Preservation Learning Network - Slimming men and women - How to change your face with photoshop ps
How to change your face with photoshop ps
Ps face-changing tutorial

The method of Ps changing face is as follows: Computer: Lenovo Tianyi 5 10S.

System: windows 10.

Software: PhotoshopCC.

1. Open ps software, pull the avatar to be replaced with ps, and select lasso tool or pen tool in the left toolbar.

2. Draw the outline of the avatar with tools. It doesn't matter if there are some marginal sundries. After the sketch is completed, a constituency will be formed.

3. Keep the selection, and ctrlj copies the selected position. In the layer window on the right, you can see the newly copied layer.

4. Enlarge the picture with the changed avatar to ps, then go back to the previous file and use the mobile tool to pull the copied layer into this file.

5. Put the drawn avatar in the original avatar position, and ctrlt adjusts the avatar size to completely block the back avatar.

6. Select the layer 1 and click the third button at the bottom left to add a mask to the layer.

7. Select the brush tool in the left toolbar and change the front color to black and the back color to white.

8. In the options bar above, change the brush to a soft brush to reduce transparency and flow.

9. Gently wipe off the uncleaned area around the new avatar with a brush. Mask erasure is used here because once an error occurs, you can change the front color to white and make up the wrong place.

10. At this time, you can see that the new avatar does not match the overall color of the picture. Select the layer of the avatar and click Hue/Saturation.

1 1. Modify the hue, saturation and lightness in the attribute respectively to make the color of the avatar match the color of the original image.

12. You can also choose other color adjustment methods in the adjustment. As long as the final result can be consistent with the original picture, the setting of the picture changing head is completed.

How to change the face in a few simple steps in Photoshop?

Changing two people's cars with Photoshop software is usually called grafting. Color balance, hue saturation and other related commands are usually used to adjust skin tone. Grafting refers to "PS composition", that is, taking a part from one picture ("clipping") and adding it to another picture to generate a new picture. There are many techniques for PS to synthesize pictures, and the steps are as follows:

1, open two pictures for processing;

2. Sketch the head of one of the pictures with the polygonal lasso tool and set an appropriate feathering value (in order not to make the edge too stiff);

3. Edit-Copy or press the shortcut key Ctrl+C to copy;

4. Open another photo ready to change the avatar and edit-paste it;

5. Adjust the head size with "Edit"-"Free Transform" to make it equal to the head size of the portrait in the original picture; Use the Move Tool to set the position of the illustration;

6. The above operations are actually on two different layers, and the parts with many scratches on the edge of the local cutout can be erased with the "Eraser" tool; Then use the "fuzzy tool" to deal with the junction and adjust it to your satisfaction;

7. To really do a good job, we should also pay attention to the consistency of the tone of the two pictures, such as the consistency of the tone adjustment of "image"-"adjustment"-"color balance";

8. Layers-Merge layers-Save as a new picture. 9. Just click File-Save As. By adjusting the pixels in advance, it will be more convenient to merge the two pictures. But if you want to do it well, you should also pay attention to the consistency of tone and face angle of the two pictures, and practice more on the key issues.

How to change the face of ps course?

1. Open the material A and the material B with PS, open the lasso tool, and draw a face area on the face of the material A with the lasso tool, covering about two corners of the eyes, a little below the mouth and a little above the forehead.

2. Copy with Ctrl+C, return to another picture of material B, and paste with CTRL+V. After pasting, the opacity will be reduced by about 65. Select the layer 1, and you can use Ctrl+T free-form tool to modify it slightly, aim at the face position, and then adjust the opacity to 100.

3. Hold down the Ctrl key with your left hand and click the thumbnail of layer 1 to load it into the selection of layer 1.

4. When there is a selection area, return to the menu bar, execute Select-Modify-Reduce and enter about 8 pixels, and click OK.

5. Go back to the layer panel, close the small eyes in front of layer 1, double-click the background layer of material B, convert the background layer into a normal layer, and press the Delete key to delete the contents in the selection.

6. Go back to the layer panel again, open the small eyes in front of layer 1, hold down Shift to select two layers, namely layer 0 and layer 1, find the menu bar, and edit-automatically mix layers.

7. Press Ctrl+M to open the curve and make it a little brighter.

How to turn the face of someone else's photo into your own face?

Use Photoshop software to synthesize, which is often called the grafting step:

1, get the photos of two people who need to change their faces ready.

2. Open Photoshop and import photos of two people who need to change their faces.

3. Use the polygon locking tool in Photoshop to draw the face outline of the person whose face has been changed.

4. After sketching, use the mobile tool to drag the outlined face to the face of the person who needs to change his face.

5.ctrl+d calls up the free transformation tool, and presses ctrl to enlarge or reduce the replaced face layer horizontally, so that the replaced face matches the face size of the person who needs to change his face.

6. The face is changed successfully, and the overall tone is adjusted. ctrl+shift+e merges all layers, and CTRL+S saves the picture (you can also use the method of adding layer mask. )

~ after two people change their faces, how to eliminate those traces with photoshop and how to get that color coordination point?

Enlarge the picture, and then use the stamp tool to eliminate the traces bit by bit. Color coordination should be done slowly from tools such as color channel, saturation and color swatch. If it is necessary to be accurate, put the picture in a very large size and circle it a little with the lasso tool.

If the requirements are not very high, you can change the faces of two people with wands. With what software?

Use photoshop software to make changes, the specific steps are as follows:

1, get the photos of two people who need to change their faces ready.

2. Open Photoshop and import photos of two people who need to change their faces.

3. Use the polygon locking tool in Photoshop to draw the face outline of the person whose face has been changed.

4. After sketching, use the mobile tool to drag the outlined face to the face of the person who needs to change his face.

5.ctrl+d calls up the free transformation tool, and presses ctrl to enlarge or reduce the replaced face layer horizontally, so that the replaced face matches the face size of the person who needs to change his face.

6. Changing face succeeded. Ctrl+shift+e merges all layers, and ctrl+s saves the picture.