Many friends bought mobile phones and installed MPT on their computers, but they couldn't find the preferential model of e 1000 after installation. This may be because your MPT version is too low and needs to be upgraded. The first step in installing MPT is to install the CD first, follow the default path, then connect the mobile phone, and then prompt to find the hardware, so that you can follow the prompts and finally connect. If the software is really installed completely, it will be fine. But if you haven't connected your mobile phone yet, turn it on and off (with your mobile phone connected to the computer) and wait for a minute and a half. If the phone is normally connected to the computer, there will be a "ding-dong" sound, and when the phone is unplugged from the data cable, there will be a slightly higher "ding-dong" sound. If the phone is normal and the connection is still unsuccessful after installing the software, you can do this in addition to upgrading. Click the function key of analog mobile phone-Settings-General Settings-Communication-Replace Modem-Next-Select Motorola usb Modem-Next-Check "Do not automatically detect the driver. Select "Next" from the list, "Motorola GSM" from the manufacturers on the left, and then "Template" on the right.

If you can't find E 1000 in your software, your software needs to be upgraded.

The upgrade is simple. Just click the function key-Settings-Real-time Update (V), and then tick the content to be upgraded according to the prompt. If your version is low, it will take a long time to download.

When installing Kingsoft java dictionary tool downloaded from the Internet on E 1000 again, it was found that its installation time was obviously longer than that of ordinary java games, and it was difficult to operate after installation. Unable to write words in the crossword column prompted by the interface. Pressing other keys didn't change anything except help information and closing operation. After a while, some related explanations about "A" appeared. In fact, I have installed this tool before, and the problem is the same. This time I want to change my website and download it again to solve the problem. So I wonder if it is because this tool needs an operating system environment or a mobile phone with CPU to run. With this question, I consulted Kingsoft, and the result is that the official transplanted version of Kingsoft is limited to Pocket PC version (as shown in the figure, only used on PDA), and there is no other version. As for J2ME version of Kingsoft mentioned in E 1000 program, customer service mm called it "self-produced version". It seems that there are still some difficulties in using this good tool in E 1000, but the version doesn't matter. E 1000 The existing hardware environment can not meet the conditions for running such a large-scale database software. I hope everyone can brainstorm, break through this bottleneck and improve our thousands of java applications.

Detailed instructions on the use and installation of JAVA files

Note: If you don't plan to transfer JAVA through the data line, you don't need to open JAVA loader.

Let's learn how to do it step by step.

Note: Do not run P2K and MPT at the same time, as this will burn out the machine.

Note: The new P2K cannot display the file list. If you want to slim down your mobile phone, please install the new P2K driver first, and then use the old P2K to view the file list and slim down. All the software related to this post is downloaded from this website, in the category of mobile phone management.

Open the JAVA loader.

If you want to upload JAVA programs from your own computer to V300-V600 (I) V80E398e1000, you must open the "JAVA Loader" which is turned off by default, and the software to be used here is "P2K people". The old version of "P2K people" can only be used with "PST". "PST" is not compatible. It is very troublesome to install. Not recommended.

Here we use the new version of "P2K Xia", which comes with its own driver and can be used independently without installing PST, which is very convenient.

After the software runs, bring the mobile phone and its data cable, and connect the data cable with the mobile phone and computer in the boot state. At this time, the computer will prompt to find new hardware and install drivers. At this point, you should choose to let WIN search for available drivers in the specified directory. This target directory is the "drv" directory in "P2K" just downloaded. After that, there will be several times to find new hardware, and repeat the above operations to install the driver correctly. If all goes well, the left side of the "P2K" software interface will show that it is connected to the mobile phone. P2K may take some time to connect to the mobile phone, so if it is not connected to the mobile phone, please wait a moment. If you don't get through for a few minutes, it's not normal.

If the driver is installed correctly but can't connect to the phone, try to patch it with USB.

Next, I want to download the "SEEM" file of my mobile phone and open the hidden function by modifying "SEEM".

Here we mainly change 0032-000 1.seem, so please add "0032-000 1" to "Download seem" in P2K, then click Download and select the saving path. When sending the same modified seem back to the mobile phone, add "0032-000 1" to "Upload seem" and click Upload. Remember to restart your phone on P2K after uploading, so that the newly uploaded one looks effective. During downloading and uploading, the status area will show the progress of downloading and uploading.

/index.asp？ boardid=5

/Soft/Index.html

/

www.ccmove.com

www.nokiabbs.com

www.e968.net

www.game 13 13.com/