In our work and life, we need one-inch or two-inch photos as identification photos. Our first reaction was to take photos in the studio, which was rather troublesome. In fact, we can use our own drawing tools to make 2-inch photos in win7 Ultimate system, which is simple and not complicated. Interested friends, let's take a look at the method of adjusting the photo to 2 inches with the drawing tool of win7 system.

The specific method is as follows:

1. First open the drawing program: Start → All programs → Accessories → Drawing.

2. You can also enter: mspaint→ OK to open the drawing that comes with the system.

3. Open the shot picture.

4. The photo size is in inches, 1 inch =2.54cm, which is usually a photo of several inches, and refers to the length of inches on the long side of the photo. For example, the size of a 2-inch photo is: 38mm×5 1mm(2.54cm×2).

After adjusting the photo, click Properties on the menu to see the size of the original photo.

5. You can also use the Ctrl+E shortcut key to call up the properties of this photo to set it → click the centimeter (note the conversion between millimeter and centimeter: 1CM = 10MM) to view it.

Master the principle: the big picture becomes smaller, the pixels are fine, the small picture becomes larger, and the picture will be blurred.

6. First, adjust the needed parts of the picture and cut off the unnecessary parts. You can use the cutting tool, click Select → then pull the box in the figure to select → Click Cut when you are satisfied.

7, you can also use the mouse to hover around the picture, wait until the mouse becomes a double arrow, click the button and press in at the same time, you can cut off this half.

8. If the photos are out of proportion, you can adjust them yourself (slim down). The method is as follows: Select all (Ctrl+A), then copy (Ctrl+C), and then paste (Ctrl+V). At this point, the original image will be superimposed on this image, and then you can adjust the size of the image at will by leaning the mouse on the lower right corner of the image (after it becomes a double arrow).

9. Finally, observe the size change of the adjustment until it is satisfactory. Don't forget to select them again, copy them, and paste them after building.

10, comparison table of pixel and photo size resolution.

Win7 comes with drawing tools. The method of how to adjust the picture size is simple and practical. It is often used in work and life. If you just need a 2-inch photo, you can try the above method to adjust the photo.