If the foot bath bag falls into the toilet, hook it out with fine wire, or buy some caustic soda, boil water to melt it, pour it into the toilet, and it will pass in ten minutes, or add water to the toilet, and then press it on the toilet mouth with the toilet plunger, as long as you hear a splash, it will be clear. If not, add water and press again.

How to clean the foot-soaking bag when it falls into the toilet?

1. Hold your breath and hook out the foot-soaking medicine bag with thin wire.

Buy some caustic soda, boil water to melt it, pour it into the toilet, and it will pass in ten minutes.

3. Add water to the toilet, and then press the toilet plunger at the toilet mouth. As long as you hear a plop, it's clear. If not, add water and press it again.

How to maintain the toilet

1, vinegar descaling method: pour the mixed solution of vinegar and water into the toilet and soak it for half a day, and the scale will be brushed off.

2, sandpaper descaling method: rubbing the toilet dirt with fine sandpaper can remove the dirt that the detergent can't remove.

3, baking soda descaling: sprinkle baking soda in the toilet, and then brew with hot water for 30 minutes, the dirt can be brushed off.

4, bleaching powder solution descaling method: first wipe with bleaching powder solution, and then rinse with water later.

5, homemade small brush to scrub the toilet: the toilet produces yellow dirt, which is difficult to clean with a brush. You can tie the waste nylon stockings to one end of the stick, dip it in foaming cleaner, and clean it once every 1 month to keep the toilet white.

6. Detergent: First, put a proper amount of water in the toilet, clean it with a toilet brush, then pour 5- 10 ml of detergent or hydrochloric acid solution and brush it evenly with a brush. If the dirt is heavy, you can soak it in a little detergent and brush it until it is clean. Hydrochloric acid is very corrosive. If cleaning with hydrochloric acid, pay attention to safety and don't splash on the skin.

Installation method of toilet

1. See if the toilet parts are complete. No, did you bump?

No matter what material you choose, as long as you arrive, you should check it to see if there are any serious problems such as damage, and also see if the parts matching the toilet are really complete, otherwise it will affect the actual use.

2. The installation tools are ready

There are many tools needed to install the toilet, such as wrench, raw material belt and glass glue. Before installing the toilet, we should prepare these installation tools, so that the toilet can be installed and used conveniently.

3. The incision of the sewage outlet should be polished and smooth.

Do not cut the sewage outlet flush with the ground. Leave it a little high and polish it.

4. Block the hole in the toilet.

Some parts of the toilet do not need holes. For example, as long as the position is fixed, the small hole can be blocked, which can prevent the smell from coming out in the future. Just seal the hole with glass glue normally.

5. Flange ring

When installing the toilet flange ring, be sure to handle it properly. It can prevent odor, but when installing it, pay attention to it above the toilet, not above the sewage outlet. This is a problem that must be paid attention to.

6. Install in the sewage outlet

The toilet sewage outlet should be aimed at the toilet sewage outlet. First, stand it upright on it, and then slowly adjust its position to make it the most suitable position. It's best to have two people to help. After all, the toilet is so heavy that it is easy to break if you lift it carelessly.

7. Angle valve

Angle valves can be installed in advance. If it is not particularly convenient to install the bathroom space, it should be installed in advance.

If there is no problem in testing the water, wrap it tightly with raw material tape and seal it so as not to leak. Is to get in close contact with water. When buying, you must choose a good quality style. Don't let it break down in use and let the whole bathroom be flooded.

8. When adjusting the position, you need to use glass glue.

After the toilet seat is selected, you should be prepared to fix it with waterproof glass glue, otherwise it will be moldy and black after long-term contact with water, and after the glass glue is fixed, the excess part can be quiet, which can make the bathroom more beautiful and fashionable as a whole.