2. The surface thickness of solid wood composite floor is very good, which can reach about 2mm, and it is relatively wear-resistant. The middle layer and the bottom layer are usually balanced by pine and Chinese fir, and the cost is relatively high;
3. The surface layer of multi-layer solid wood composite floor is very thin, only about 0.6- 1 mm, and the bottom layer is miscellaneous wood. The quality mainly depends on the glue used.
Maintenance of three-layer solid wood composite floor, the specific measures are as follows:
(1) Indoor humidity should not be too high. Keep the floor dry, bright and clean, and use a wringed cotton mop for daily cleaning. In case of stubborn stains, wipe them with neutral detergent first, and then wipe them with a wringing cotton mop. Do not scrub with organic solvents such as acid, alkali or gasoline.
(2) During daily use, attention should be paid to avoid scratching the floor by hard objects such as heavy metal sharp objects, glass bricks and spikes; Don't expose the floor to open flames, and don't put high-power electric heaters directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; It is absolutely forbidden to flood for a long time.
(3) In order to maintain the beauty of the three-layer solid wood composite floor and prolong the service life of the paint surface, it is recommended to wax it twice a year. Wipe the floor clean before waxing, then evenly coat the surface with a layer of floor wax, dry it a little and wipe it with a soft cloth until it is smooth and bright.
(4) If a large area is accidentally flooded or partially soaked in water for a long time, if there is stagnant water, it should be drained with a dry cloth in time and let it dry naturally. Do not dry or expose to the sun with an electric heater.
5] Exposure to strong sunlight for a long time or sharp rise and fall of indoor temperature may lead to premature aging of the paint surface of solid wood composite flooring, which should be avoided as far as possible.
[6] If the installation place is temporarily suspended, keep the indoor air circulating, and don't cover it with plastic paper or newspaper, so as to avoid the surface paint film losing its luster after being pasted for a long time.
Once regularly clean the floor, vacuum, prevent sand or friction dust accumulation and scratch the floor surface. Insoles can be placed outside the door to avoid bringing sand or abrasive dust indoors. When cleaning the floor at ordinary times, you can wipe it with a wringed cotton mop.
Do not try to wipe the floor with a wet mop or corrosive liquid (such as soapy water and gasoline).
If the outdoor humidity is higher than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and sultry weather, you can turn on the air conditioner or electric fan.
Levies In order to increase the indoor air humidity in autumn and winter, a humidifier can be used to keep the indoor air humidity at 40%-80%.
⑽ When moving furniture, you should not push and pull directly on the floor, but lift it gently. Furniture that moves frequently can be glued with a layer of rubber at the bottom.
References:
Three-layer solid wood composite floor-Baidu Encyclopedia