The failure code of Weineng wall-hung boiler module refers to the code corresponding to the furnace failure problem in use. These codes can not only remind users of what is wrong, but also help maintenance personnel to locate and repair the cause of the fault.

The following are some common fault codes of Weineng wall-hung boiler module and their meanings:

1.E00 1 line is broken. Check whether there are faulty cables or connecting wires.

2.E002- Over-current protection failure, which may be circuit overload or short circuit.

3.E003- Failure of overheat protection may be caused by poor heat dissipation of equipment or other reasons.

4.E004- Outlet water temperature sensor error

5.E005- Exhaust temperature sensor error.

6.E008- Failure of insufficient gas pressure

7.E0 10- There is an error in the water level sensor.

8.E0 1 1- There is an error in the water temperature sensor.

9.E0 13- Combustion failure, which may be the failure of gas system, water heater nozzle or other components.

The above are some common fault codes and their meanings of Weineng wall-hung boiler module. If there is any fault, it is recommended to maintain it in time to ensure the normal operation of the equipment.