1. Dismantle the Risbell integrated stove bracket: first turn off the air inlet and the power switch, then remove the stove bracket with a screwdriver and take the stove off the cooker.
2. Dismantle the cooker and grate: separate the cooker, remove the main burner and the auxiliary burner with a wrench, and then remove the grate from the cooker.
3. Decontamination treatment: use a brush to clean the removed grate and cooker in the washbasin. For lighting glass, you can soak it in clear water and then wipe it with a wet towel.
4. Cleaning the inside of the cooker: use detergent and soapy water to clean the furnace purifier, nozzle and burner of the integrated cooker. For stubborn stains, you can gently wipe them with diluted ammonia or vinegar water. Be careful not to use steel balls or items that are difficult to remove for cleaning.
5. Assembly: After cleaning, install the grate and cooker one by one, and then install the cooker into the cooker bracket.
6. Ignition detection: After installation, turn on the air inlet and power switch again to check whether the ignition detection is normal and whether the gas pipeline leaks.
In short, we must pay attention to safety when disassembling and cleaning the Risbell integrated stove to avoid unnecessary injuries caused by accidents caused by improper operation. In addition, in the process of disassembly and assembly, it is not allowed to disassemble forcibly, so as not to damage its key components.