1. Before starting the machine, squeeze a proper amount of blue slimming glue (big blue glue) on the machine. (Based on the principle of good promotion)

2. Apply it to the part you want to carve. (Otherwise, hand-drawing will be wasted.)

3. After uniform coating, turn on the machine.

Hands must always be wet, because the machine needs electricity. You can wet your hands with our NAPCA spray.

5. When your hands are wet, take a small silver place on each side. This is the key to the work of the machine. This machine works by conducting electricity between positive and negative electrodes. ) this is also the patent of our Nuskin Spa machine.

6. Wear it on your body. When you hear a beep, it means that the machine has started to work, and you can push it wherever you want. The direction of the body is generally circular. Keep circling, from bottom to top. You can park in a fleshy place. Try to slow down and don't push too fast!

7. When you hear the long sound of "di ~ ~ ~", it means the end.

8. After pushing, just rinse and dry the machine, and then apply (white glue) body tightening glue.