The first mode is the simplest, that is, use the commonly used template that comes with PPT software and choose the one that is automatically generated.
The second mode is hand-drawing, using the method of stick figure.
The third is to insert the saved picture directly into the PPT document.
PPT template: lovely cloud, sun, cartoon style universal template There are many cartoon fonts in the Chinese character library. Pay attention to the legibility of fonts when doing PPT, that is, the recognition is good. In addition, a thicker font is suitable for the title font, but not for the text font. A thinner font can be used for both the title font and the text font. Let me introduce some of my most commonly used animation fonts!
First, the cool music in the station: first of all, recommend this font, because this font is free for commercial use, which means it can be used in commercial occasions without spending money! Although it is free, this font is very good and suitable for headlines.
Second, Hanyi Black Litchi: This font is relatively thick and suitable for the title content. In addition, this font has a strong sense of handwriting, which can show a lovely and naive feeling.
3. Hanyi Wheat Body: The font in the white box below is Hanyi Wheat Body. The external expression of this font is a strong sense of strokes, and then there are small white dots in the strokes, which is suitable for agriculture, picture books and painting-related occasions.
Fourth, Han Yishuai line style: This font is relatively thick, and both the title and the text can be used. In the following example, Han Yishuai's line style is used in the text. Compared with other cartoon fonts, this font is very clear and suitable for reading occasions.
Five, Hanyi Xiaokang art simplification: there are some intentional rotation designs in the text in the case, which have nothing to do with this font! This font is a rare serif in comic fonts. It is more suitable for the title position or printed matter.
6. Square body: This font has a round appearance, which is a very lovely one among animation fonts. This font is suitable for lovely pets, mothers and babies, young people or girls.
Special note: All the above fonts are copyrighted. Except for the first font, it can be commercialized for free. Other font businesses need to contact the relevant copyright parties ~
Cartoon ppt how to make animation in slides can be achieved by the following methods:
1. Switch the whole slide: open the slide-click Design-Slide Design-Animation Scheme in the taskbar-select the scheme you want, which can be the switching mode of the whole slide, one by one or several, and you can choose it yourself when you see the dialog box.
2. Animation of objects in each slide: open the slide-right-click to select objects to be animated-customize animation-add effects-you can choose to enter, exit, emphasize, etc. Basically, you can do this. I will send you a detailed document for you to learn.
10 object animation
Slide transitions can be animated, and objects in slides can also be animated. Object animation can appear in three situations: entry, emphasis and exit. Entering refers to the object entering the slide through animation during the projection; Emphasis means that the object is already on the slide when it is shown, and still stays on the slide after animation; Exit means that the object is already on the slide when it is shown, and disappears from the slide after the animation. Path animation is a special form of animation, which can make objects move according to the set path.
There are three ways to activate animation: when you click, before and after, when you click, animation will only happen when you click the left mouse button; The former refers to the simultaneous animation of the previous object; After refers to the animation of the previous object. That is to say, "when clicking" is often used to manually control animation playback, "before" is often used to animate multiple objects at the same time, and "after" is often used to animate multiple objects in turn.
The order of animation playback is determined by the custom animation list. When an object with animation effect is added, it occupies an item in the custom animation list. When displayed, the animation of the object is played from top to bottom according to the customized animation list.
(1) Add the "Enter" animation of the object.
To add an animation effect to an object, first select the object, then open the custom animation task pane, click the Add Effect button and select Enter, and the animation effect list will appear. Click one of the animation effects, and the animation item corresponding to the object will appear in the custom animation list.
The list of animation effects only lists 9 recently used effects. Click Other Effects to open the Add Item Effect dialog box, from which you can select more effects.
(2) Modify the added object animation
When you add an object animation, the animation behavior will follow the default settings. To modify the default settings, click the corresponding object animation item in the Custom Animation list and make the following modifications:
Change: The original "Add Effect" button is changed to "Change". Click to modify the animation effect.
Delete: delete this item from the animation list, and the object is in a static state during projection.
Start: You can choose when to click, before and after. ... expand the animation in the slide by:
1. Switch the whole slide: open the slide-click Design-Slide Design-Animation Scheme in the taskbar-select the scheme you want, which can be the switching mode of the whole slide, one by one or several, and you can choose it yourself when you see the dialog box.
2. Animation of objects in each slide: open the slide-right-click to select objects to be animated-customize animation-add effects-you can choose to enter, exit, emphasize, etc. Basically, you can do this. I will send you a detailed document for you to learn.
10 object animation
Slide transitions can be animated, and objects in slides can also be animated. Object animation can appear in three situations: entry, emphasis and exit. Entering refers to the object entering the slide through animation during the projection; Emphasis means that the object is already on the slide when it is shown, and still stays on the slide after animation; Exit means that the object is already on the slide when it is shown, and disappears from the slide after the animation. Path animation is a special form of animation, which can make objects move according to the set path.
There are three ways to activate animation: when you click, before and after, when you click, animation will only happen when you click the left mouse button; The former refers to the simultaneous animation of the previous object; After refers to the animation of the previous object. That is to say, "when clicking" is often used to manually control animation playback, "before" is often used to animate multiple objects at the same time, and "after" is often used to animate multiple objects in turn.
The order of animation playback is determined by the custom animation list. When an object with animation effect is added, it occupies an item in the custom animation list. When displayed, the animation of the object is played from top to bottom according to the customized animation list.
(1) Add the "Enter" animation of the object.
To add an animation effect to an object, first select the object, then open the custom animation task pane, click the Add Effect button and select Enter, and the animation effect list will appear. Click one of the animation effects, and the animation item corresponding to the object will appear in the custom animation list.
The list of animation effects only lists 9 recently used effects. Click Other Effects to open the Add Item Effect dialog box, from which you can select more effects.
(2) Modify the added object animation
When you add an object animation, the animation behavior will follow the default settings. To modify the default settings, click the corresponding object animation item in the Custom Animation list and make the following modifications:
Change: The original "Add Effect" button is changed to "Change". Click to modify the animation effect.
Delete: delete this item from the animation list, and the object is in a static state during projection.
Start: You can choose when to click, before and after.
Direction: Modify how the animation effect is displayed.
Speed: Modify the projection speed of the animation effect.
Adjust the projection order of object animation: click the "up arrow" at the bottom to go forward, and click the "down arrow" to go backward.
(3) path animation
The path animation of an object means that the object can move along a predetermined path, and the action path can be built into the system or drawn with line tools. Path animation is often used to make complex animation effects such as bird flying and parabolic motion, and is often used to make courseware.
A. add the path animation of the object
Select an object, click Add Effect in the task pane of the custom animation, and then select the action path. A list of action paths will appear, which lists eight used action paths. To use a different built-in action path, click Other Action Path to make a selection. To draw your own path, choose to draw a custom path. You can draw lines, curves and curves.
After setting, the animation item corresponding to the object will appear in the custom animation list. If you use the built-in route, the route of the object will appear on the slide. If "Draw Custom Route" is selected, you need to draw the route yourself, and the drawing method is the same as the line tool of AutoShape.
B. Modify the path
When an object is attached with a path animation, its motion path will appear on the slide. The path has two "triangle" symbols, the green "triangle" symbol indicates the starting point of the movement, and the red "triangle" symbol with a vertical line indicates the end point of the movement.
You can select objects and paths separately. When you click an object, the object is selected, and when you click a path, the path is selected. When selecting a path, if it is a straight path, you can directly drag the starting point or the ending point to adjust the path; If it is a curve or polyline path, you need to right-click the path and select Edit Vertex from the right-click menu, and the vertex will appear. At this point, you can adjust the shape of the path by dragging the vertices.
By default, when you move an object in editing state, the path associated with it will move with it, but when you move a path, the object will not move with it. This is called the "unlocked" state of the path. If you want the object and path to move independently, you need to set the path to lock in the Custom Animation task pane.
1 1. Put away hyperlinks and action settings.