1, open the PR software, drag the video to the project panel, then drag it to the time trajectory, splice them together, and cut off the unnecessary parts, as shown in the figure.
2. Switch to the effect panel, search for video effect-transition-shutter and then drag and drop to the first video material to add it twice, as shown in the figure.
3. Adjust the parameters of two shutter effects in the effect control.
4. In the last frame of the first material, hold down the Shift key+← key four times, move 20 frames to the left, and then put in the transition to complete the key frame, and adjust the parameter to 0%, as shown in the figure.
5. Place the time pointer at the last frame of the first material, adjust the parameters of the two transitions to 100%, then enlarge the effect control window, right-click the four key frames, and select Slow in and Slow out as shown.
6. After the transition is completed, adjust their speed curve to change the effect from slow to fast, as shown in the figure.
7. You can move the last two key frames forward a few frames, leaving a blank, and then put the time pointer on the first frame of the second video material, and add two shutter effects in the same way, as shown in the figure.
8. Press the → key three times, move three frames to the right and place the transition completion key frame. Adjust the parameter to 100%. Press Shift +→ four times and move 20 frames to the right. Also place the transition completion key frame and adjust the parameter to 0%, as shown in the figure.
9. Use the same method to set the four key frames to slow in and slow out, and then adjust their speed curves, and the adjustment effect will change from slow to fast, as shown in the figure.
10. Select these two video materials, move to the next track, and then right-click on the project panel to select a new project-color mask, and set the color to blue. Drag the color mask to the bottom of the video material on the time track, and adjust its length to be the same as the video material above, as shown in the figure.
1 1. Next, make a beautification effect. Create a new project adjustment layer in the Project panel, and drag the adjustment layer to the middle above the time track video material, and keep it for 20 frames left and right, as shown in the figure.
12. Move up and copy an adjustment layer, move the adjustment layer below to the left to observe the effect, add a copy effect to it, adjust the count to 3, add a mirror effect, add four, adjust the reflection center and reflection angle respectively, and make the effect as shown below.
13. Move the adjustment layer below back to its original position, add a deformation effect to the adjustment layer above, adjust the zoom to 300, deselect the use of synthetic shutter angle, adjust the shutter angle to 240, and then rotate the key frame to move this key frame to the beginning.
14. Press the ← key to move one frame to the left in the middle transition and adjust the rotation parameter to 90. Press the → key to move two frames to the right and adjust the rotation parameter to -90. In the last frame of the adjustment layer, adjust the parameter to 0, as shown in the figure.
15, select the order-rendering from the in point to the out point, and the production can be completed after the rendering is completed.
The above is a detailed tutorial of Pr software making transition special effects. You can open your software and operate it while watching, so you can get started.