The operation is as follows: 1. First find a photo of a person and open it with PS software.
2. Press the shortcut key Crtl+J to copy the layer. Click the eyes in front of the background layer to hide the background layer.
Click the edge of the character with the pen tool to form a closed path, right-click to create a selection, press the shortcut key Ctrl+Shift+I to reverse the selection, and then press Delete to delete the selection. 3. Click Filter-> Liquefaction, use liquefaction tools to adjust characters.
First, cover your body with a frozen mask and adjust your face. After the face is adjusted, cover your face with a frozen mask and adjust your body. Click OK after adjustment. 4.Ctrl+J copy the layer.
Execute filter->; Artistic effect-> Draw and smear, set as shown below, and click OK. Set the layer blending mode to overlay and the opacity to 65%.
Use a daubing tool to daub hair, eyebrows, etc. Right-click the copy of layer 1 and click Visible Layers.
5. Create a new layer, open a picture, copy and paste it into the layer as the background. Move the layer under "Layer Copy 1".
Ctrl+T resize the background and press enter to confirm. Right-click Copy of Layer 1 and Merge Visible Layers.
6. Execute the filter->; Texture->; Texture, set the scale, highlight the value, and then click OK. At this point, the task is completed.
Real-life photos become comics.
2.2. How does PS animate people's photos?
1, modify the picture resolution, 200~300, and the pixel size is about 10M.
2. Then there is color matching. 3. Copy the background layer twice. The copy mode of layer 1 is soft light, and the middle value of layer 1 is 5.
4. Perform Filter-Other-Gao Fancha Retention on the copy of layer 1, with a value of 85, and then ctrl+e will merge the layers down. 5. Then copy the layer 1 to another layer, and execute the filter-noise-intermediate value with a value of 7.
6. Create a white mask on the copy of the layer 1 and erase the five senses with a black brush. The opacity of the brush can be smaller, and then merged downwards, and the skin of this picture is completed. 7. Now do your hair again. Use the quick selection tool to roughly select hair. After feathering 12 pixels, ctrl+j copies one layer.
8. Apply along the direction of the hair with an applicator, and adjust the size of the applicator at any time. The left side was smeared. 9. Adjust the color after all smearing. If you feel that the broken hair on the side is not easy to handle, you can use a brush to absorb the background color and cover it. Use the Deepen and Brighten tools to lighten and darken.
10. Tick out the path with the pen tool. Follow the hair, absorb the darker color on the hair instead of black, draw with a brush, and then blur with a box. The value is 12. 1 1. Create a new layer, fill it with black, change the mode to color dimming, and point it on the hair with a white low transparency brush, and the highlights will come out. You can also hook the path on it with a pen and draw it with a white brush.
12. Finally, add some fine hairs, the brush size is about 5, and the color is darker, and it is finished.
3. How to use photoshop to turn real photos of characters into cartoon characters?
The operation is as follows:
1. First find a photo of a person and open it with PS software.
2. Press the shortcut key Crtl+J to copy the layer. Click the eyes in front of the background layer to hide the background layer. Click the edge of the character with the pen tool to form a closed path, right-click to create a selection, press the shortcut key Ctrl+Shift+I to reverse the selection, and then press Delete to delete the selection.
3. Click Filter-> ; Liquefaction, use liquefaction tools to adjust characters. First, cover your body with a frozen mask and adjust your face. After the face is adjusted, cover your face with a frozen mask and adjust your body. Click OK after adjustment.
4.Ctrl+J copy the layer. Execute filter->; ; Artistic effect-> ; Draw and smear, set as shown below, and click OK. Set the layer blending mode to overlay and the opacity to 65%. Use a daubing tool to daub hair, eyebrows, etc. Right-click the copy of layer 1 and click Visible Layers.
5. Create a new layer, open a picture, copy and paste it into the layer as the background. Move the layer under "Layer Copy 1". Ctrl+T resize the background and press enter to confirm. Right-click Copy of Layer 1 and Merge Visible Layers.
6. Execute the filter->; ; Texture->; ; Texture, set the scale, highlight the value, and then click OK. At this point, the task is completed. Real-life photos become comics.
4. The detailed process of how to use ps to turn photos into comic characters.
The method is as follows: 1. Open the photo to be modified with PS.
2. Click "Filter". 3. Select "Fuzzy".
4. Click "Gaussian Blur". 5. Set the parameters and click OK.
6. Click "Filter" again. 7. Select "Filter Library".
8. Click on "Artistic Effect". 9. Select "Dry Brush".
10, and click "OK" after adjustment. 1 1, click "Create" white layer.
12. Set the opacity to 20%. 13. Check the outline with the pen tool.
14, then delete the white layer. 15. Open Image.
16. Open Adjust. 17, click "Curve".
18, adjusted according to personal habits. 19, and the final effect is shown in the figure.
: AdobePhotoshop, referred to as "PS", is an image processing software developed and distributed by AdobeSystems. Photoshop mainly deals with digital images composed of pixels.
With its numerous editing and drawing tools, you can edit pictures effectively. Ps has many functions, including pictures, graphics, text, video, publishing and so on.
Adobe supports Windows operating system, Android system and MacOS, but users of Linux operating system can use Wine to run Photoshop. Photoshop is one of the most famous image processing software of Adobe.
Most people's understanding of Photoshop is limited to a good picture editing software, but they don't know many of its applications. In fact, Photoshop has a wide range of applications, including images, graphics, text, video, publishing and so on. References: PS_.
5. How to use ps to turn a real picture into a cartoonist?
1. People can easily extract it from the pure white background in portraits.
Use the quick selection tool (w). 2. Isolate the head from the clothes.
Delete the elements of the role. The level of body and clothes should be along the neckline of his shirt.
3. Convert each layer into a smart object. Grab each layer separately, layer >; Smart object > convert to smart object.
So as to prevent the degradation of image quality caused by deformation. 4. A common cartoon technique is to make the proportion of the head very large.
To this end, we must shrink the text layer and edit >; Free conversion. 5. Use Edit > Transform > Transform to start shaping the first layer.
Fit the neck to the neckline of the shirt and enlarge the head. The purpose of this step is only to establish the basic shape of the head, which is the basis of other layers.
6. Twist and lengthen the previously cut chin and polish it slightly. Make it as consistent as possible with it, and such seams should not be too obvious.
7. In the same way, do the same operation for other parts cut before. 8. Now add layer mask to each layer, and treat each layer with soft black paint to connect them into a coherent whole.
9. Use a forward deformation tool, about the size of 200 brushes, increase the size of the forehead and gently push the skin to the hairline. 10. Use the freezing tool to raise the protruding spectacle frame.
Mainly used to prevent the deformation of the frame, which is convenient for us to deal with the eyes in the later stage. 1 1. After the liquefaction effect is applied, the effect should be like this.
12, and finally adjust the color to complete the final effect. .
6. How to change the character photos into cartoon styles in 6.ps?
You can transfer it to hand painting.
Hand-drawing (also called hand-drawing imitation and mouse-drawing imitation) is an image processing method using drawing software and image processing tools (sai, photoshop, etc.). ) Convert photos of people or landscapes into similar hand-drawn effects. Nowadays, more and more people use graphic tablets to draw pictures, and there are more and more hand-drawn components.
Common tool settings for hand-drawn conversion:
Stroke: Sets the brush size color. Sketch with a pen, right-click the stroke path, uncheck the simulated pressure (and then you can erase the corners with a soft corner eraser), confirm, and then select Esc to delete the path, or right-click to delete the path.
Brush low transparency: set it at about 20%-30%.
Gaussian Blur: Filter-Blur-Gaussian Blur. The value is between 3 and 5.
Absorb color: select the foreground color, and then click on the part of the original image that needs to be absorbed to confirm.
Simulation pressure: first select the brush size and color, then select the brush setting box in the upper right corner (you can also see it by selecting window-brush), and select other pen pressures controlled by dynamic and opacity jitter.
General steps:
1. Process the picture as a whole. (such as removing logo, removing noise, etc.). )
2, skin treatment (commonly used "Gaussian blur" to smooth the skin)
3. Treat the eyes (use the pen tool to outline the eyes and deepen the eyebrows)
4. Handle the nose (use the pen tool to outline the nose, and draw the nose highlights through white highlights and Gaussian blur)
5, to deal with the mouth (pen tool outline, deepen the mouth edge operation, adjust the color of the lips)
6. Process the clothing (select the quick mask tool, select the clothing area, and blur the surface).
7. Treat the hair (choose the quick mask tool, select the hair area, and blur the surface).
7.ps tutorial: How to turn a character picture into a cartoon picture
First, use PS to open the original photo of the person to be processed, and press CTRL+J to copy the layer. Second, filter liquefaction is performed to enlarge the eyes in the person photo. Thirdly, liquefy the eye to copy the layer, remove the color, filter-blur-Gaussian blur, set the radius of Gaussian blur to about 4 pixels, then change the layer mode to soft light and adjust the transparency. This is also a kind of peeling, and there are many other peeling methods. You can also use other ones. This is not stipulated. 4. Next, create a new layer, use the pen tool and start making up. Draw eyeliner first, dynamically check the shape in the brush preset, create a new path, stroke the path, check the simulated pressure of the brush, and filter-blur-Gaussian blur after painting. The model radius is about 0.7.
Fifth, then draw eyelashes and eyeliner for your eyes in the same way. Sixth, after painting eyeliner and eyelashes, we add a pupil brush to our eyes to reduce the transparency of the brush and change the layer to soft light.
Seven, use a splash brush to gently click on the eyebrows a few times, and then use a smudge tool to reduce the opacity and smear on the eyebrows and draw the eyebrows. Eight, use a dark brown brush to reduce opacity. Priming the eyeliner. Nine, paint the skin after painting, and avoid eyes and mouth when painting. Then, you can change the layer mode to soft light filter, and then reduce the opacity. Ten, dye your hair. I use brown here. You can also choose your favorite color, the opacity is about 50%, change the layer to color, and then erase the excess with an eraser.
Eleven, change the highlight mode of brush points to soft light for hair. 12. Create a new path again and start drawing hair with the pen tool. The amount of hair depends on personal preference, and it looks fake to draw more. 13. After the hair is painted, use the filter-blur-Gaussian blur, and the radius of the blur is smaller. See the effect can be repeated several times. 14. Almost. Now add some blush, layer mode, and color to adjust the opacity of blush.
Fifteen, in the copy of the layer, use the thinning tool to erase the whites of the eyes and the highlights of the eyes, and then use the deepening tool to erase the black parts of the eyes to make the eyes look brighter.
8. How to use ps to turn photos into cartoons?
Use software: PhotoshopCC
The steps to turn photos into cartoons and illustrations with ps are as follows:
1, preliminary preparation
Prepare photos to be processed (higher resolution) and animated sky materials. The original image used here is:
Note: This course is only suitable for dealing with landscapes, not people. Moreover, the treatment of scenery is not suitable for dynamic objects such as vehicles and running water, so it is actually quite picking photos.
2. Oil painting filter
Now I think the "dry brush" filter in the original tutorial is useless, so I only used the "oil painting" filter. The oil painting filter is located in the filter menu, and PhotoshopCC20 14 may not have this filter.
The six parameters currently used are 0. 1, 5, 10, 0, 0 and 0. You can use the values of these parameters as a reference first, and then master them yourself after doing more. If the filter effect is not strong after use, you can double it by Ctrl+F(Mac is _F).
3.CameraRaw filter
Although the "oil painting" filter is very important, you may not notice any obvious changes at this moment. Don't worry, you will see the effect after using the "CameraRaw" filter. This filter is located in the Filters menu of PhotoshopCC.
As shown in the figure, exposure+1 minimizes contrast and maximizes shadow, black, clarity and natural saturation.
4. Stealing the day
Dig out the blue sky, and then replace it with the animation-style sky material prepared in advance (continue to be lazy to use Makoto Shinkai's cloud). There are many methods of matting, so I won't go into details here. If the sky in your original film is pure blue or pure gray (that is, there is no cloud), it only takes 10 second at most to use the wand tool.
After changing the material of the sky, remember to adjust the exposure of the sky with "curve" or other tools to make it coordinate with the foreground. In fact, at this point, a good work has been completed for most people.
5. Final repair
The contrast between comics and movies is lower than that of photos, so I often add an "adjustment" layer in the final repair to reduce the contrast.
In addition, you can also observe the use of blue-purple (dark part), warm yellow (bright part) and other colors in Makoto Shinkai's works, deal with your works with the method of "color balance", and then add a little warm yellow light spot to the bright part. Subsequent adjustments can be made according to the actual situation, such as the adjustment of lens halo and light and shadow, as shown in the following figure:
How to make a cartoon 1 How to make a cartoon photo of yourself?
1. Start Meitu Xiu Xiu software.
Click the "Open" menu at the top right to open the picture. 2. Click "Basic" under the "Beautify" menu, select "Sharpen" in "Basic", select the transparency as 100%, and click OK.
3. Select "Sketch" in "Art", select the transparency of 65%, and click OK. 4. Still select the "crayon" in "Art", select the transparency of 35%, and click OK.
At this time, it has become a prototype, and the texture has already appeared. 5. Select "Sharpen" in "Basic" again, select the transparency as 50%, and click OK.
6. Select "Smart Color Painting" in "Basic", select the transparency as 100%, and click OK. 7. Then there are soft colors.
In portrait, select "Natural Beauty", select 70% transparency, and click OK. 8. Click the "Beauty" menu at the top left, and then click "Skin Rejuvenation". Select "Smart Skin Rejuvenation" in "Overall Skin Rejuvenation" and adjust the transparency to "Deep".
9. Click on the "mascara" on the left to color the eyebrows of the characters. In order to better highlight the effect of the eyes.
10. Click the "Border" menu at the top left, click "Textured Border", select the material on the right, select the "Border Color" at the top left to select the color suitable for people, and adjust the transparency to 50%. At this point, the cartoon picture has been formed.
1 1, see the effect, as shown below. Introduction of extended data function 1, Meitu social circle Meitu Xiu Xiu launched an original high-quality photo community, a gathering place for young people's trendy life, and shared the recorder wonderfully.
Here, you can share and communicate with pictures, break the embarrassment of strangers, make like-minded friends, and create your own unique personality world. 2, the trend filter texture trend filter is updated in real time, and various styles are easily fixed, so that photos have their own color matching experts.
3. All-round retouching is tired of seeing the same photos and wants to be different. Editing, borders, stickers, mosaics.
Super beautification function, control all kinds of styles at will, give you the style you want. 4, filter camera, real-time filter with film sense, magnifying glass for a better life, with natural dynamic beauty effect, wherever you go, let the whole world be your photo background.
5, dynamic camera super dreamy dynamic stickers, enhance your lovely attributes, and become a delicate fairy in seconds. There is also a cool and dynamic AR, which is deeply loved by handsome little brothers and sisters.
6, flash night shooting professional camera noise reduction effect, with beauty fill light, can stand the test of night shooting, night * * * should also be beautiful. References:-Meitu Xiu Xiu.
2. How to turn a photo into an animated picture?
There are many methods, the most professional one is photoshop, but for those who haven't studied it, the operation is very complicated.
At present, there are many apps in the application market that can turn a photo into animation. Such apps include Meitu Xiu Xiu, MIX and Magic Man Camera. Take Meitu Xiu Xiu as an example: 1. First, search and download Meitu Xiu Xiu in the application market, install and open it after downloading; 2. After opening the software, select Meitu Black Technology; 3. After entering Meitu Black Technology, there are many animation styles. Take the first painting robot as an example; 4. Click Experience Now on the first painting robot, and it will pop up for you to choose photos or take photos; 5. Take choosing photos in an album as an example. After entering the album, select the photos to be animated. Meitu Xiu Xiu will automatically turn your photos into animation effects. You can choose the animation style below, and then click Save in the upper right corner.
3. Does the mobile phone have software that can turn pictures into cartoons?
Mobile phone software such as cartoon camera, magic camera, cartoon creativity, myotee face cute, PicsArt can make exclusive cartoon images. These softwares can not only automatically generate cartoon images, but also provide a variety of options for you to customize, and finally generate cartoon-style photos.
Here's a detailed introduction: 1, CartoonCamera, a photo application on Android, can process photos into cartoon style. The biggest feature of cartoon camera is that it supports real-time display. Users can instantly see cartoon-like scenes on the screen, and can take pictures without post-processing.
At present, cartoon cameras support five effects: cartoon, sepia, white chalk, dark tone and colored edge. After selecting the effect, users can adjust the focal length and the thickness of cartoon lines, and support functions such as flash and front camera. 2, Magic Man Camera, this is an original mobile phone application that makes real people into humorous cartoons. In the magical world, everyone can see their own happiness and sunshine.
When you turn on the Magic Man camera, there will be unexpected surprises every time you shoot it: hilarious humor, super cute sweetness, faint freshness and fantastic cosplay. The work taken by the Magic Man camera is no longer a copy of the photo, but a work of art with creative value. A simple shot, life will change from now on; 3. Comic creativity is a mobile phone software that turns photos into comic pictures. You can take/select photos and stylize them to make them look like hand-drawn comic pictures-this is a very clear artistic style of Japanese comics.
You can also choose to add (if you like) an interesting comic effect; 4.myotee Face Meng is a face spelling software developed by erickkuo and his brother, which was released on 2013165438+1October 26th. Even if the player can't draw, he can easily make his own cartoon image.
There are a variety of hairstyles, facial features, backgrounds and other settings that can be customized; 5.PicsArt is an audio-visual image software, and its running environment supports Android2.2. The software is only applicable to firmware version 2.2 and above. PicsArt is a photo taking and photo processing software with rich functions. Much like professional drawing PicSayPro, you can draw directly, process photos and add text.
4. What software can turn real pictures into animated pictures?
Photoshop can turn pictures into animations.
1, open PS, and then open multiple pictures in a window.
2. After opening the picture, click the window in the toolbar.
3. After clicking the window, click the timeline.
4. After clicking the timeline, select Create Frame Animation.
5. After clicking Create Frame Animation, click Add Frame, and then click multiple times to play the page as many times as needed.
6. After adding the frame, select the second frame.
7. Then hide the layer in front of the second layer in the layer page, and do the same for the third frame.
8. After setting the frame page, click Set Play Time.
9. After setting the play time, you can click the play preview.
10. After previewing, press Alt+ctrl+shift+S to save the web format, and then select Save GIF format.
1 1. Select the GIF format and click Save.
5. How to make photos into cartoons
First, adjust the color, then use the painting tool to make the hand-painted imitation effect, then use tools such as brushes to make smoke and highlight lines, and finally complete the hand-painted imitation effect by adding words.
step
1, open the original material.
2. Press Ctrl+M to adjust the curve and slightly whiten the characters.
3. Use the Lock Sleeve tool to select the red part of the character's neck. Then adjust the selection: image >；; Adjust > optional colors, select red (cyan+100 black -70) to eliminate jealousy, then use the smudge tool to make the eye contour even, and then use the dodge tool to smudge the reflective part of the eye.
4. Carefully daub the eyebrows and hair of the characters with the daubing tool brush No.27 (10%).
5. Then do your hair as I said before.
6. Use a white brush to draw a few strokes on the picture at will, and then Gaussian blur (about 20) to make a smoke effect. Fold a few more layers.
7. Select the pen tool, brush the pixel to 8, and then draw the path (right click the path opacity of 60% to change the layer properties and emit light).
8. Create a curve adjustment layer and adjust the blue color. The parameter settings are as follows.
9. Finally, use the pen tool to tick off the main outline of the character, make a slight stroke, and then type to complete the final effect.
How to use ps to turn photos into cartoons? Use software: PhotoshopCC.
The steps to turn photos into cartoons and illustrations with ps are as follows:
1, preliminary preparation
Prepare photos to be processed (higher resolution) and animated sky materials. The original image used here is:
Note: This course is only suitable for dealing with landscapes, not people. Moreover, the treatment of scenery is not suitable for dynamic objects such as vehicles and running water, so it is actually quite picking photos.
2. Oil painting filter
Now I think the "dry brush" filter in the original tutorial is useless, so I only used the "oil painting" filter. The oil painting filter is located in the filter menu, and PhotoshopCC20 14 may not have this filter.
The six parameters currently used are 0. 1, 5, 10, 0, 0 and 0. You can use the values of these parameters as a reference first, and then master them yourself after doing more. If the filter effect is not strong after use, you can double it by Ctrl+F(Mac is _F).
3.CameraRaw filter
Although the "oil painting" filter is very important, you may not notice any obvious changes at this moment. Don't worry, you will see the effect after using the "CameraRaw" filter. This filter is located in the Filters menu of PhotoshopCC.
As shown in the figure, exposure+1 minimizes contrast and maximizes shadow, black, clarity and natural saturation.
4. Stealing the day
Dig out the blue sky, and then replace it with the animation-style sky material prepared in advance (continue to be lazy to use Makoto Shinkai's cloud). There are many methods of matting, so I won't go into details here. If the sky in your original film is pure blue or pure gray (that is, there is no cloud), it only takes 10 second at most to use the wand tool.
After changing the material of the sky, remember to adjust the exposure of the sky with "curve" or other tools to make it coordinate with the foreground. In fact, at this point, a good work has been completed for most people.
5. Final repair
The contrast between comics and movies is lower than that of photos, so I often add an "adjustment" layer in the final repair to reduce the contrast.
In addition, you can also observe the use of blue-purple (dark part), warm yellow (bright part) and other colors in Makoto Shinkai's works, deal with your works with the method of "color balance", and then add a little warm yellow light spot to the bright part. Subsequent adjustments can be made according to the actual situation, such as the adjustment of lens halo and light and shadow, as shown in the following figure: