Should be added slowly,
Try different things,
Only in this way can you find the electrical appliance that suits you.
Different brands and categories of supplies,
Actually,
Generally speaking, it has little impact,
What matters is your skill and luck.
Basic tools
Fishing rod,
Winch (fish winch),
Fish line (used as a secondary line),
Fishing gear box or sorting box (with hooks inside,
Plumb,
Twisted),
scissors
Backup equipment
Spare rod and winch,
Spare plumb hammer and fishhook (different sizes),
Silk steak (fish steak,
Hand fishing)
bait
Shrimp (if it is economical to use dead shrimp),
sandworm
Appendages
Fish cage,
Fishing by hand,
Knife,
Grinding stone,
Bubbles,
Rod seat,
Refrigerator,
Bucket and air pump
Food and water
According to personal preference
aid
Magnetic tape,
Mobile phone (for help)
The following are some suggestions from novice friends on tool selection:
How to choose a fishhook
As far as the part of the hook body is concerned, the fish hook can be divided into six parts: handle, handle, hook back (bottom), hook tail, hook tip and hook thorn.
The function of the handle head is to make the tied thread difficult to slip out. There are many shapes, such as straight flat head, side flat head, ring head, barbed head and so on. As long as it is not too big or too small, you generally don't need to pay attention.
Hook handles are long and short. The long handle hook is suitable for long bait such as stringing earthworms and insects, and the short handle hook is suitable for small particle bait such as stringing gluten and rice grains.
Hook back has the shape of round back, flat back, inclined back and arch back. Mechanically speaking, the round back hook can bear the largest tensile force, and the flat back is poor. If the rigidity is good, the hook on the back of the bow is most likely to be hooked and fall off. The hook width is also different. The distance between the handle and the end is the width of the back. It is too narrow and too small to pierce the fish's mouth, and the fish can easily break free; It's too wide, and the tension it can bear is weak. The ideal width is to make the hook tail, hook back and hook handle basically form a circle according to the size of the whole hook (and considering the thickness of the hook strip). The hook is bigger, the loop is bigger and the width is wider. After the fish is hooked, the hook back plays a major role, and the difference of hook shape is mainly reflected in the hook back, which is most worthy of study.
The length of the hook end refers to the depth after the meat enters the hook. Long and deep, but not easy to take the bait; Short, easy to hook and easy to unhook. Hook tail is also different from upright, inclined inward and inclined outward. Among these three hook shapes, the upright one is the most reasonable; Tilting is not easy to unhook or hook; Extroverts are easy to decouple.
The hook tip should be sharp. However, if it is too sharp, it will be easy to be hooked when it touches aquatic plants, and it is difficult for earthworms to string together. Wuxi hook is a better choice.
The barb needs to be clear. If it is too long, it will be troublesome to remove the hook. If it is too short, it will lose the barb effect.
In addition to paying attention to the hook shape, we should also pay attention to the quality of steel bars. Too brittle or too soft is not good. Buy back a few hooks, you might as well take a few for destructive test: hold the handle of the hook with needle-nosed pliers and poke the hook tip into the wood to see. The broken steel is too brittle; Straightness in stretching is too soft to be used. If you catch a big fish or a grass stone, if you find that the hook is deformed, you should abandon it. Don't lose too much because of small things.
Floating choice
The choice of float depends on the depth of fishing waters, the size of fish, the urgency of water flow and the weight of lead blocks. When fishing deep-bottom fish, you should choose a big float with a big lead pendant to make the bait sink quickly. When fishing in windy waters, you should choose a long line drift with a thin top. The buoyancy of the float should be adjusted accurately and reasonably with the weight of the lead pendant (including the bait). When fishing in shallow water, the buoyancy of the float is equal to the weight of the lead pendant. When floating fishing, the buoyancy of the float is greater than the weight of lead and bait, so that when the fish swallows the bait, it can be more sensitively reflected on the float.