2, sewing YY, the first thing to sew is some small parts. The first thing to sew on this vest is two pockets. Pocket I provided you with 1: 1 drawings, and you can do pattern cutting by printing directly. The pattern is clean, don't forget to sew.
Cut two pieces of flannel as the face cloth of the pocket, and then cut two pieces of interlining with similar color to plush. In addition, cut two elastic bands, each about 5 cm shorter than the width of the pocket cloth;
3. A piece of flannel and a piece of plain cloth are sewn into a circle, with the front facing inward, and a back opening of three or four centimeters is left at the bottom edge. By the way, in the sewing process, both ends of the elastic band are sewn and fixed at both ends of the bag mouth. Trim the arc seam after sewing:
4. Turn the bag out from the front at the bottom back opening, and sew the back opening with a hand sewing needle. Draw a line under the elastic band:
5. Draw the pocket position on the two front garments with a pocket-shaped board for installation, and then fix the three sides of the pocket in place with a bead needle before sewing:
6. Cut 2 pieces of face cloth and 2 pieces of flannel according to 1: 1 ear plate. Then sew a piece of cloth and a piece of flannel in alignment, and then turn the front side out to make a pair of ears:
7. Fold the ear hair inward and fix it on the top edges of the two hats. It doesn't matter whether the position is in front or behind, but the idea should be symmetrical:
8. Sew the sides of the hat and the two hats, and make the surface of the hat:
9. Then sew a plush hat, and then sew two layers of hats inward:
10, dig out the front, sew a line at the bottom, and merge the inner and outer layers:
1 1. Before putting on the hat, sew the shoulder seams of the front and back pieces of the garment, and the inside and outside fabrics are the same:
12. Glue the fabric of the hat and the fabric of the clothes together. First, align the midpoint of the bottom edge of the hat with the midpoint of the back collar of the garment and fix it with a bead needle, and then gradually align it from the middle to both sides. The positions of the two ends of the hat should be one circle wide inward from the front neckline (the zipper is flush with the neckline, which will be introduced later). Suture after fixation:
13, attach plush lining and sew it up. At this time, the starting point and ending point of sewing can extend to both ends, and the front part of the door can also be sewn for convenience of sewing at the back, not too much.
14. Spread the front and back pieces of the clothes separately, so that the front and back layers of the left and right armholes are aligned inward. Sewing left armhole and right armhole:
15. Tuck the two front bodies into the back from their respective shoulders, and then turn the front bodies out. Next, we need to sew the edges. Be sure to turn the front side out before sewing, otherwise it will be mixed up ~ ~
16. align and sew the lining cloth, face cloth and face cloth of the opposite front and rear side seams together, and leave a back seam of about 10 cm on the lining cloth of one side seam;
17. Now only the hem and the rest of the placket are left. It's simple. Just sew a line along the edge from front to back: fold the ear wool inward and fix it on the top edges of the two caps. It doesn't matter whether the position is before or after, but the thought should be symmetrical:
18, turn the garment body from the back opening to the front, and open it after sewing:
19. Tap the button or the five-claw button in front of the door: