5. The wheels of the elevator color wheel will continue to darken the dark part to the left, and the dark part will brighten to the right. When the elevator is pulled to the left, you can see that the picture is not so gray. 6. The component diagram has three color blocks, which represent three channels of red, green and blue, and 0 represents the dark part. By pulling the color wheel, you can see that the component diagram has changed. 7.4 The brightness of the wheel under the color wheel becomes lower to the left and brighter to the right. The difference lies in which area the additional wheel focuses. 8. The colors on the color wheel are red, green and blue, representing the three primary colors. If you move the color of Lift to red, you can see that the picture becomes redder, but it adjusts the dark area. 9. Pull a clip back into the palette and you can see that the picture is gray. Pull Lift to the left, you can see the oscilloscope move down, or you can see the picture darken. 10. Pull the Gamma midtone to the right and the gain to the right. You can see that the midtone and highlight have changed, and the oscilloscope has also changed. 1 1. Move Lift to blue, and you can see that the dark area turns blue, the gain moves to blue, and the highlight turns blue. When the dark part of ascension changes, the middle and bright parts will also change, but the main change is the dark part. Similarly, the middle and dark parts of the highlight change also change. 12. Restore the picture to the original gray level. In the oscilloscope, you can also see that there are no bright parts and no dark parts. Dimming the gain to the left and brightening the gain to the right. The bright part can't be adjusted too hard, and the gamma middle tone is also bright to the right. 13. The first one under the color wheel is white balance. When it selects a certain point in the picture, it thinks that the selected place is white, and uses this hue to change other parts of the picture. 14. The second A is automatic balance, which is generally not used after clicking. 15. 1 is the contrast, that is, pulling the contrast, and the axis is to adjust the halftone, saturation and hue. 16.2 is to adjust the color temperature and hue, and the halftone details can be skinned. Ok, how to use the Da Vinci first-class color wheel? The content of "The Course of Using Color Wheel in Da Vinci's First-level College" is simply shared, and I hope it will help you learn to operate Da Vinci ~ Da Vinci integrates editing, color matching, visual effects, dynamic graphics and audio post-production, and can't operate, even the excellent functions are useless! If you want to know about Leonardo da Vinci, please click the link: