Current location - Health Preservation Learning Network - Healthy weight loss - What float is used in shallow water of 30-60cm and how to adjust it?
What float is used in shallow water of 30-60cm and how to adjust it?
Find the water depth: You need to know the specific water depth of the water area, install the float, lead skin and various tools to make the float move upward until the tip of the float is above the surface of 1 mesh or horizontal water, and the distance from the float eye to the lead pendant is the water depth. Leveling water: the float moves down to a distance slightly greater than the length of the parting line, then the float is adjusted with half water, the lead skin is trimmed, and the float is adjusted to level the water. Fishing 1 mesh: In specific fishing, the number of fishing meshes is about 1 mesh. At this time, the double hooks are the bottom hook and the undercover, which is more suitable when fishing shallowly. 1. What kind of floating fishing is used in shallow waters of 30-60cm? It is an activity in various waters, but fishing in different waters is different. For example, some waters are so shallow that you can only fish at a depth of 30 to 60 cm. At this time, it is necessary to prepare suitable tools according to the characteristics of fishing in shallow water. Floating is one of the tools to be prepared. Because the water is shallow, you can choose to eat relatively little lead, and fishing in shallow water is more sensitive. Using a small amount of lead to match the lead of the float is a light lead, and the effect will be good after being matched. In addition, after selecting the float, it is necessary to adjust the float in an appropriate way.

Secondly, how to adjust the drift in shallow water of 30-60cm has been introduced above. If you want to fish in shallow waters of 30 to 60cm, you need to prepare suitable floats and lead weights. In addition, after the float is ready, it is necessary to adjust the float in the following ways:

1. Find the water depth: First, you need to know the specific water depth of the water area. You can find the water depth first, that is, the bottom. Combine floats, lead skins and various tools. Then immerse in the water and float up to the surface. When the drift tip is about 1 mesh above the water surface or the horizontal plane, observe the distance from the drift net to the plumb drop, which is the water depth.

2. Pingshui: Then, you have to adjust your eyes specially. Let the float move down first, the distance is slightly larger than the length of the sub-line, that is, the process of semi-Shui Piao adjustment, so that the double hook moves from the bottom of the water area. Trim the lead skin again and adjust it to level.

3. Fishing 1 mesh: In the process of fishing, you need to pay attention to the number of fishing meshes, which can be around 1 mesh. Generally speaking, it is leveling water fishing 1 mesh. This bleaching method is more suitable when the water is shallow. At this time, the double hook touches the bottom and the undercover, and the signal is more accurate.