1, comfort, hygiene and health care: radiant floor heating is the most comfortable heating method, with uniform indoor surface temperature and gradually decreasing room temperature from bottom to top, giving people a good feeling of warm feet and cool head; It is not easy to cause polluted air convection and the indoor air is clean; Improve blood circulation and promote metabolism.

2. Save space and beautify the living room: cancel the radiator and its branch pipes indoors, increase the use area, facilitate decoration and home layout, and reduce sanitary dead ends.

3, high efficiency and energy saving: the radiation heating mode has higher thermal efficiency than the convection heating mode, and the heat is concentrated at the height that the human body benefits; The heat loss during transmission is small; Low-temperature floor radiant heating can be controlled by layers, households and rooms, and users can adjust it according to the situation, which is effective in saving energy.

4. Good thermal stability: the floor heating and concrete floor have large thermal storage capacity and good thermal stability. In the case of intermittent heating, the indoor temperature changes slowly.

5. Low operating cost: compared with other heating equipment, it can save energy by about 20%, and can make full use of low-temperature hot water resources or use electricity price policy to reduce operating cost.

6. Long service life: In low-temperature floor heating, plastic pipes or heating cables are buried underground, with good stability, no corrosion and no man-made damage, and the service life is synchronized with the building. Compared with convection heating, it saves maintenance and replacement costs.

7. Strong adaptability: the equipment is not affected by outdoor temperature, which greatly prolongs the life of the heating system.

8, reduce floor noise:

In China, 15cm thick circular hole slab or cast-in-place concrete slab is generally used, and its sound insulation effect is very poor. People going upstairs will affect the downstairs. Floor heating is adopted, which increases the insulation layer and furniture. Sound insulation effect is very good.

9. Low maintenance cost: The floor heating system adopts corrosion-resistant and rustless materials. The pipeline will not be blocked or the flow rate will change due to rust. After concrete backfill, it has been embedded in the building structure layer. If there is no man-made damage, it will not need maintenance within 50 years and can be ignored.

Disadvantages:

Circulating system:

First, the early installation cost is high.

Second, the geosphere needs cleaning, usually once every two to five years.

Third, the boiler needs maintenance, usually once every two years.

Electric floor heating: unable to provide domestic hot water, with slight radiation. Once there is a bad place, it needs to be completely replaced.