1. Healthy and comfortable

Floor heating: Chinese medicine believes that "warming feet and cooling the roof" is an effective way of fitness. Floor heating is a bottom-up heat transfer method, which meets human physiological requirements and can improve blood circulation and promote metabolism. Compared with air conditioners and radiators, the indoor air temperature of floor heating is more uniform, which avoids the problems of dust and air drying caused by convection heat transfer.

Radiator: Radiator is installed in the local area of indoor wall, mainly by convection, and hot air convection from top to bottom, so it will form a temperature gradient change, and the closer it is to the heat source, the higher the temperature will be. Moreover, the radiator is installed in a lower position indoors, and the room temperature will be hot and cold. It does not conform to the Chinese medicine saying that "warm feet and cool roofs". The comfort of radiator is worse than that of floor heating.

take (up) room

Floor heating: the floor heater is hidden under the floor, and the controller is embedded in the wall, which does not occupy indoor area, and is beautiful and convenient for home decoration; However, if there is a backfill layer in the floor heating, it will occupy a certain height. If there are restrictions on the height of the building, you can also choose the floor heating in Hanks, Germany without backfilling.

Radiator: Because the radiator is exposed in the indoor space, it will not occupy the floor height, but it will occupy the use area of the indoor space and affect the beautiful decoration design.

3. High efficiency and energy saving

Floor heating takes the whole ground as the radiation surface, with large heat dissipation area, full heat exchange, large heat storage in the filling layer, high efficiency and energy saving. It takes about 6 hours for ordinary floor heating to make the room temperature reach the set temperature after the system is turned on, but it will take a long time for the indoor temperature not to drop rapidly after the system is turned off. The superconducting floor heating in Hanks, Germany, only takes 30 minutes for the room to reach the set temperature. The design temperature of 16℃ can reach the effect of 20℃ of the traditional radiator, saving energy by 20%-30% compared with the traditional way. It adopts time-sharing and room-sharing control, and each room runs independently and can be adjusted by itself. Does not cause energy waste;

Radiator Radiator is a surface-mounted project, which is directly exposed indoors and dissipates heat through air convection. There is no temperature control system, so the temperature rises quickly and the indoor temperature cannot be controlled. If the temperature is too high, it will produce a feeling of heat. Generally, heat dissipation begins in about 15 minutes, and it only takes about 1 hour for the human body to achieve the heating effect, and the temperature drops rapidly, which is more suitable for heating in a short time.

4. Maintenance

Choose good floor heating products and accessories. As long as it is not man-made damage, it has the same life as the building, no pipe network and no joints, and it is truly zero maintenance;

The radiator is exposed indoors. If there is a problem, it is easy to maintain.

Second, how to choose heating equipment.

1. The demand is mainly selected according to space size, floor height and time at home;

2. Appearance inspection: The hot appearance equipment shall be smooth and free from peeling, wrinkling, rust spots and bubbles;

3. The performance check control switch shall be flexible and reliable, and the timer shall be accurate. Check whether the indicator light on the power supply is displayed, and check whether there is abnormal sound and noise in the operation of the fan.

4. Turn on the power supply after the installation of temperature rise test, and feel whether the temperature rises after running for a few minutes.

There are many kinds of HVAC products now, and the quality of each kind of products is uneven. Quality problems will inevitably occur. Once there is a quality problem, it is more difficult for consumers and customers to defend their rights. Besides elaborate products, meticulous follow-up service and comprehensive and thoughtful service are the best added value of products.

German Ruhr strictly controls the quality of raw materials, production technology and equipment, and guarantees the absolute quality of products through third-party certification. In addition, it also adheres to the concept of "products can be homogenized, but services cannot be homogenized", giving customers a good backing. We not only try our best to meet the needs of customers, but also emphasize the construction and service of its marketing channels in order to provide better services to customers.

Heating in winter is necessary,

No matter what kind of heating equipment,

According to its own structure and installation conditions

It is best to choose the heating method that suits you best.