What plate should I use to make a wardrobe?
1, solid wood: when it comes to wardrobe materials, solid wood is naturally the best, which avoids excessive use of adhesives, is healthier and more environmentally friendly, has strong bearing capacity, is safe and stable, has long service life, can reach more than 500 times that of ordinary wooden wardrobes, and is durable. However, the cost of solid wood wardrobes is relatively high, so most wardrobes on the market are made up of plates and plates.
2, large core board: large core board, also known as joinery board, is a good material for wardrobe frame. The large core board is plywood with solid wood core, the inner layer is the core made of strip logs, and then the upper material is pasted on the outside. Smooth and flat surface, strong stability, not easy to deform. Generally, it is divided into three layers, five layers and nine layers according to the thickness. The thicker the board, the higher the price, which can be selected according to the pressure and strength.
3. High-density board: High-density board is a commonly used man-made board, which is made by soaking wood and branches in water, crushing and pressing. Uniform density, high strength and easy processing, but the disadvantage is poor moisture resistance. It is not recommended to put it in damp places such as kitchen and bathroom, but it is not bad to use it as a wardrobe.
4. Solid wood particleboard: As the name implies, solid wood particleboard is made by granulating solid wood and then pressing it with glue. It retains some physical properties of solid wood, has good nail holding power and light texture, and will not cause too much pressure on the wardrobe, but its bearing capacity is not weak and its cost is low. So it is often used in wardrobe manufacturing.
5, joinery board (large core board): moisture-proof effect is good, can not be directly painted, joinery board is made of natural wood strips in the middle of the core, and both sides are glued with thin veneer, as the name suggests, large core board is one of the main materials in decoration. Can be used as furniture, wooden doors, door covers, heating covers, curtain boxes, etc. Its waterproof and moisture-proof performance is better than particleboard and medium density fiberboard. Wood products such as furniture made of large core board have to go through two processes: gluing and painting, which is costly. The large core plate is divided into 3, 5 and 9 pieces according to its thickness. You can choose according to the pressure and intensity. The thicker the board, the higher the price.
Selection method of wardrobe plate
1, depending on whether the board substrate is environmentally friendly. As long as the content of free formaldehyde in the board is ≤9mg/ 100 g, which is the European E 1 environmental protection standard, there is no harm to human health. The most direct way is to open the cupboard door and open it. If there is a strong pungent smell, it will even make people cry, indicating that the formaldehyde content exceeds the standard; The second is to look at the material inspection certificate of the merchant to see if it holds the inspection certificate of the relevant national wood-based panel quality inspection center.
2. See if the plate is real. At present, in order to reduce costs, some small manufacturers in the market usually sell dog meat by hanging sheep's heads to deceive consumers. The thickness of standard cabinets is 18mm, but small manufacturers generally use particleboard as high-density board to promote it. The thickness of the plate is 16mm, which consumers call 18 mm. ..