The installation method and video of the new sagitar seat cover are as follows: Rear backrest: First, pull out the headrest and press the movable bolt of the backrest. The way of pulling out the headrest varies according to the structure of the car; Then cover the backrest and put it up and down in the correct position; Insert the rubber band at the bottom of the front of the backrest cover into the back of the backrest, string the rubber bands together from bottom to top, and tie them to the side with the rubber bands on the side; Then arrange the covered backrest and insert it into the headrest to install the rear backrest. Back seat: For a car with a back seat, it is quite simple to pull up the whole seat slightly and turn it up directly. Firstly, put the seat cover on the seat and adjust the position; Pull the rubber band at the front end of the rear seat down from the seat to the back and tie it to the rear rubber band; Then tighten the rope at the back end; Then straighten the seat cover and install the rear seat.