Treadmill, as a common fitness equipment, occasionally stops automatically when used, which has a negative impact on the fitness effect of users. Let's share the reason why the treadmill stops automatically.

1. Prevent overload

During the running of the treadmill, when the motor is found to be overheated and the current rises sharply, the runner will automatically enter the overload protection mode, and at this time, the runner will automatically stop to protect the motor from being damaged, which is the treadmill's own protection mechanism.

2. Accidental collision protection

When using the treadmill, you need to observe some safety regulations, such as not sitting on the treadmill, not wearing loose clothes and so on. If these regulations are violated, an accidental collision may occur, and the running opportunity will automatically stop to avoid further safety accidents.

3. Abnormal vibration

If there is abnormal vibration during the running of the treadmill, the reasons may include the mechanical structure of the treadmill itself, uneven ground and so on. These vibrations often lead to loosening or even damage of treadmill components, so runners will automatically stop to avoid further damage.

4. Control panel failure

The control panel of the treadmill is one of the important parts in the running of the treadmill. Once the control panel fails or is damaged, the treadmill will not run normally. At this point, the runner will automatically stop and prompt the user for maintenance.

In short, the automatic stop of the treadmill is a normal protection mechanism, so users don't have to worry too much. When the treadmill stops automatically, the condition of the treadmill should be carefully checked and the faults should be eliminated in time to ensure the fitness effect of the user.