Ceramic tile adhesive: also known as dry bonding method, is a new paving auxiliary material. It changes the wet method of mortar cement. Tiles do not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of paving are good, the working conditions are greatly improved. Its bonding effect is also better than traditional mortar cement, and it is especially suitable for small and medium-sized projects and home decoration with small working face and unsatisfactory working environment. Colorful joint filler: it is not ordinary colored cement, but is generally used for floors or walls with joints. It has the characteristics of strong color fixation, pressure resistance, wear resistance, non-alkalization, non-shrinkage and non-pulverization, which not only solves the problem of moisture falling off and weak bonding in the cracks of ceramic tiles, but also makes the color matching between cracks and ceramic tiles even and harmonious, bringing out the best in each other. Cross positioning frame of edge banding: the use of these auxiliary materials greatly improves the construction technology of yin and yang corners of pavement. Tiles do not need 45-degree trimming, which greatly saves working hours and damage. Cross positioning can improve the joint accuracy of floor tile paving and simplify the construction technology. Multi-specification combination: it is characterized by selecting a variety of floor tiles with different geometric sizes and laying them in groups according to a certain combination. Because the floor tiles are made up of different sizes and in various ways, the geometric lines of the ground change immediately, which shows changes and vividness in the order. Floor tiles are composed of many colors, which is the latest paving trend of Spanish tiles. It is composed of floor tiles with different glaze colors randomly. Its visual effects vary widely, which makes people daydream. This is a challenge to our traditional aesthetic view of "symmetry and unity". It is suitable for larger halls. Leaving seam for paving: Antique floor tiles are popular in the market now, which mainly emphasizes the return of history. The glaze is uneven and the straight edges are corroded. When paving, necessary gaps are left and filled with colored cement, so that the overall effect is unified and the sense of historical dignity is emphasized. Wall paving: the combination of 45-degree oblique paving and vertical paving makes the wall surface colorful from the original monotonous geometric lines, and enhances the three-dimensional sense and active atmosphere of the space. 1, please check whether the product model, grade, size and color number displayed on the package are uniform before paving. If you have any objection to the product quality, please contact the manufacturer or distributor as soon as possible. Once laid, it's not clear. 2. Before paving, the pasted object or ground shall be leveled. Dry-laid base reaches a certain hardness before laying ceramic tiles, and the joint should be adjusted between 2 and 3 mm. It is recommended to use 325. Dry-paving method participates in the proportion of base course: (cement: fine sand = 1: 3) bonding layer: (cement: fine sand = 1: 2). 4. If the pattern has obvious mosaic features, please identify its mosaic features and keep the paving direction consistent. If the pattern features are not obvious or there is no pattern, please combine the requirements of construction effect. 5, after the completion of the shop is stuck, the residual cement stains on the brick surface should be wiped off in time. The paved ground needs to be maintained for 4-5 days to prevent local unevenness caused by external force. What should we do? The choice of office decoration style is the most important. According to different industries, customers and partners have different impressions of each other. Modern and stable and generous are more suitable for small and medium-sized enterprises. A large number of beautiful and tortuous lines are used, and all the colors of the space are decorated with green plants, creating special effects through lighting; Artistic design, many but not chaotic lines and colorful lighting convey different office interests. Unique shape, simple materials, pay more attention to original features, reduce reuse and pursue uniqueness. It is the most basic method to choose office decoration style according to the needs of the profession itself. In addition to the characteristics of the profession itself, how to highlight the company's image, concept and logo in the decoration style and take into account every detail of the company's product and service attitude. It is not enough to just make a company logo at the front desk. The company logo directly represents the company image, so it is necessary to embody and publicize the company image everywhere. Let employees get psychological satisfaction and increase customers' trust in the company. Considering the layout according to the work needs, the organization of the enterprise usually includes the president's office, the manager's office, the personnel department, the administrative department, the e-commerce department, the design department, the logistics office, the conference room, the lounge, the fitness space, the conference area and so on. The establishment of these departments should be determined according to the actual situation of the enterprise. These should be included in the office design. For owners with high cleaning requirements, choosing solid colors will appear elegant, but maintenance is time-consuming, because solid colors are not resistant to dirt and need to be cleaned frequently; For those owners who are busy at work and don't clean often, it is best to choose tiles with slight patterns or granular colors, which will also make them feel very comfortable and more resistant to dirt. The skirting line of the living room floor is necessary, because the walls are generally painted, and the parts where the paint is connected with the floor often contact with the feet of the living room furniture, which is easy to get dirty and damaged. This problem can generally be avoided by using the skirting line made of vitrified brick, which can make the living room look more beautiful. The upper end of the crural line should be polished into a quarter arc or a 45-degree oblique angle, and the machined surface should be polished. The color of the skirting line, many packages launched by the decoration company are unified with the large floor tiles laid on the ground, but the colors can be distinguished. It is best to choose vitrified brick as the color and material of ceramic tile because it is wear-resistant, bright and easy to clean. Take "Starlight Coast", a popular special ceramic in the market, as an example. It has very strong wear resistance and pollution resistance and high gloss. Under the light, the texture of this tile is like a beach under the starry sky at night. Colorful pearls, starfish sand and burning stars in the distance complement each other, just like under the bright night. This is a good effect that vitrified brick can achieve, so the living room generally likes to use it. Some people may like to use antique bricks, which are rich in color, but often heavy in color and difficult to clean. For families, it is best not to use stone in the living room. Not only the cost of stone is high, the color is relatively single, but also most stone materials have some radioactive problems, and the surface smoothness and wear resistance are also very low. They are often used in large public places. The size of the living room floor tile is related to the size of the living room floor tile. If it is small, try to use a smaller specification. Specifically, if the living room area is below 30 square meters, you can consider using 600 * 600; If it is 30-40 flat, you can use 600*600 or 800 * 800; If it is more than 40 square meters, you can consider using 800*800. If large-size tiles are laid in the small living room, it will make the living room uncoordinated and have a bad sense of space; If the floor is covered with small-sized tiles in a large area, it will be crowded indoors. Brand and quality identification of ceramic tiles The first thing to pay attention to when buying ceramic tiles is to choose the brand and see the popularity and reputation. Some small manufacturers fight price wars by reducing production costs, and the products they produce are not up to standard. A year later, the surface of the tile was mottled and cracked, which was unsightly. It is necessary for consumers to screen out brands with good reputation through information from media, internet, friends and other channels. Secondly, it depends on the quality, mainly according to some evaluation reports and enterprise evaluations, to judge the quality of ceramic tiles, including water absorption, strength, thermal shock resistance, glaze crack resistance, wear resistance, small color difference, frost resistance, impact resistance, linear thermal expansion coefficient, wet expansion, friction coefficient of floor tiles and so on. Of course, cost performance is also very important. Some very good tile brands will hold promotional activities on important festivals. The tiles with very favorable prices can generally be divided into polished tiles, vitrified tiles, glazed tiles, mosaics and other polished tiles. Nowadays, polished tiles mainly refer to porcelain tiles with high hardness and wear resistance after surface polishing, thus producing mirror effect. The main types of polished tiles are: ordinary polishing, solid color polishing, bleeding polishing, free cloth polishing, micro-powder polishing, large particle polishing, full particle polishing and so on. This series of polished tiles is made by pressing clay and stone powder. The front and back sides are the same color, not glazed, and the surface is polished after firing, so that the front side is bright and the back side is the true color of the brick. Because it is polished, it is not resistant to dirt. There will be water marks after being dragged with a mop. The second disadvantage is that polished tiles are not slippery because they are smooth. The third problem is that colored liquids are easy to penetrate. However, a good brand is not easy to penetrate because of its good pressure, high density, high firing temperature and high density, but this is not absolute. No matter how good the polished brick is, if the ink or soy sauce is accidentally dropped on it for a few minutes and then wiped, it will inevitably leave traces that will never be wiped off, because the stain has penetrated into the brick. In the decoration design of clay brick project, ceramic tile is an indispensable decorative material. Tiles may bring a cold feeling to everyone's home, but we can pursue innovation in tile paving methods, such as I-shaped tiles, diamond-shaped tiles and mixed tiles with different colors and the same specifications, which will decorate office decoration with different feelings. I'm telling you, you also pay great attention to the tile laying method. Dry-laid tiles are generally used for laying tiles on the ground: after the grass-roots level is watered and wetted, floating sand and sundries are removed. Wipe the adhesive layer, use one to three layers of dry cement mortar, level it, put the ceramic tile on the mortar and tamp it with a rubber hammer, remove the floor tile and pour the mortar, then stabilize the floor tile and tamp it down. In office decoration, dry paving method can effectively avoid the occurrence of air bubbles and empty drums during floor tile paving. However, due to the high labor intensity and high technical content, dry paving method is generally more expensive than wet paving method, and the thickness of dry paving method will be larger, so it is generally used to lay larger tiles.