Or manual optimization.
I. System attribute settings
1. Change the BIOS from the default value to the optimized setting value, and set the hard disk as the first boot in the boot sequence.
2. Disable idle IDE channels.
Right-click My Computer-Properties-Hardware-Device Manager, expand the IDE ATA/PATA controller, and then right-click the primary and secondary IDE channels-Advanced Settings-set the device type to None and the transfer mode to DMA.
3. Optimize visual effects
Right-click My Computer-Properties-Advanced, and in the performance bar, click Settings-Visual Effects to adjust to the best performance or delete some unnecessary functions.
4. Optimize performance
Right-click My Computer-Properties-Advanced, and in the performance column, click Settings-Advanced-Select programs for processor planning and memory usage.
Then click "Change" in the "Virtual Memory" area-select the system letter in the drive list-customize the size-set the values in "Initial Size" and "Maximum Size", click "Set" button, and finally click "OK" button to exit. The minimum value of virtual memory is 0.5-2 times that of 65438+ physical memory, and the maximum value is 2-3 times that of physical memory.
5, startup and fault recovery
"My Computer"-"Properties"-"Advanced"-"Startup and Fault Repair"-"Settings", in the "System Fault Area", remove the boxes in front of "Write events in the system log", "Send management alarm" and "Automatic restart"; Set "Write Debugging Information" to "None"; Click "Edit", and in the notepad file that pops up:
[Operating System] Timeout =30 Change 30 seconds to 0 seconds.
6. Disable error reporting
"My Computer"-"Properties"-"Advanced"-Click "Error Reporting", select "Disable Error Reporting", and check "Notify me when a serious error occurs"-OK.
7. Turn off the system restore function
Click Start-Right-click My Computer-Properties-System Restore. In order to give consideration to system performance and system security, it is suggested to turn off the system restore function of partitioned disks except XP system disk, and click Settings to set the required disk space to the minimum.
8. Turn off automatic updates.
Click Start-Right-click My Computer-Properties-Automatic Update-Choose to turn off automatic update or choose to notify me when downloads are available.
9, close the remote desktop
Start-Right-click My Computer-Properties-Remote, and uncheck the "Allow remote assistance invitation from this computer" and "Allow users to connect to this computer remotely" check boxes in Remote Assistance and Remote Desktop-OK.
10, disable the hibernation function.
Click Start-Control Panel-Power Management-Hibernation, and uncheck the box before "Enable Hibernation".
Second, set the display attribute function.
1. Right-click on the blank space of the desktop-Properties-set "Background" and "Screen Saver" to "None"; Remove the checkmark before "Turn on automatic conversion of desktop wallpaper";
2. Right-click on the blank space of the desktop-Properties-Appearance-Effect-uncheck the box in front of "Use the following transitional effects for menus and tooltips" and check "Use the following methods to smooth the edges of screen fonts"-OK.
3. Right-click the blank space of the desktop-Properties-Settings-You can set the "screen resolution" to 800×600 or1024× 768; Generally, "color quality" should not be set too high, and "medium" is better.
4. Right-click the desktop-Properties-Settings-Advanced-Display-Set the blank space where the flat screen refresh rate is "75-85hz", and the LCD will automatically.
5. Right-click the blank space on the desktop-Properties-Settings-Advanced-Troubleshooting-Adjust Hardware Acceleration to All -OK.
Third, turn off the "Internet Time Synchronization" function.
Right-click the time in the notification area of the taskbar-select Adjust Date/Time-Internet Time, and uncheck it before "Automatically synchronize with the Internet time server"-OK.
Fourth, close some startup programs Start-Run -msconfig- Start, except antivirus software and input method, general programs can be closed.
Verb (short for verb) disables redundant service components.
Right-click My Computer-Administration-Services and Applications-Services, and set unnecessary services as disabled or manual in the right pane.
6. Close Dr. Watson, Dr. Watson.
Click Start-Run-Enter the command drwtsn32, or Start-All Programs-Accessories-System Tools-System Information-Tools/Dr. Watson, and call up Dr. Watson in the system, leaving only ".
Seven, modify the registry
1. Accelerate startup and shutdown.
In [start]-> [run]-> type [registry]-> [HKEY current user]->; [Control Panel]-> [Desktop], change the numerical data of the string value [HungAppTimeout] to [200], and change the numerical data of the string value [WaitToKillAppTimeout] to 1000. In addition, in [HKEY _ Local _ Machine] → [System] →; [Current Control Set]-> [control], change the numerical data of the string value [HungAppTimeout] to [200], and change the numerical data of the string value [waittokilservicetimeout] to 1000.
2. Automatically close the stop response program.
In [start]-> [run]-> type [registry]-> [HKEY current user]->; [Control Panel]-> [Desktop], change the numeric data of the string value [AutoEndTasks] to 1, and then restart.
3. Clear the unused DLL files in the memory.
Type [regedit]-> [hkkey _ local _ machine] in [Start]-> [Run]-> [Software]-> [Microsoft]-> [Windows]-& gt； [CurrentVersion], add an item [AlwaysUnloadDLL] in [Explorer], and the default value is set to 1. Note: If the default value is set to [0], this function will be disabled.
4. Speed up the menu display.
In [start]-> [run]-> type [registry]-> [HKEY current user]->; [Control Panel]-> [Desktop], change the numeric data of the string value [MenuShowDelay] to [0]. If the menu display speed is too fast to adapt after adjustment, please change the value of [MenuShowDelay] to [200] and restart.
5, speed up the automatic refresh rate
In [start]-> [run]-> type [regedit]-> [HKEY _ local _ machine]-> [system]-> [Current Control Set]-> [control]-> [Update], change the numerical data of Dword[UpdateMode] to [0], and then restart.
6, speed up the pre-reading ability, improve the boot speed.
In [start]-> [run]-> type [regedit]-> [HKEY _ local _ machine]-> [system]-> [Current Control Set]-> [control]-> [Session Manager]-> [MemoryManagement], in the window to the right of [PrefetchParameters], change the numerical data of [enable prefetch] as follows. For example, if you use a CPU with PIII 800MHz or above, it is recommended to change the numerical data to 4 or 5, otherwise it is recommended to keep the numerical data as the default value, that is, 3.
7. Use the L2 cache of CPU to speed up the overall efficiency.
In [start]-> [run]-> type [regedit]-> [HKEY _ local _ machine]-> [system]-> [Current Control Set]-> [control]-> [SessionManager], in the right window of [MemoryManagement], change the numerical data of [SecondLevelDataCache] to the same decimal value as the L2 cache of CPU: for example, P4 1.6G is 5 12Kb for an L2 cache, and the numerical data is changed to the decimal value of 5 12.
8. Run the defragmenter when you start the computer.
In [start]-> [run]-> type [regedit]-> [HKEY _ local _ machine]-> [Software]-> [Microsoft]-> [Dfrg]-& gt； [BootOptimizeFunction], set the string value [Enable] to: y equals on, and n equals off.
9. Automatically close the stop response program when closing.
Type [Registry]-> [HKEY User]-> in [Start]-> [Run]; [.Default]-> [Control Panel], and then change the numerical data of [AutoEndTasks] to 1 in the window on the right side of [Desktop] to log off or restart.
10, speed up broadband access.
In [start]-> [run]-> in [HKEY local machine]-> [software]-> type [registry editing]->; [strategy]-> [Microsoft]-> [Windows], add a project named [Psched], and add a Dword value [nonbestforlimit] in the window to the right of [Psched]. The numerical data is 0.
1 1 to speed up the broadband network speed.
Open Registry Editor and locate.
HKEY _ local _ machine \ system \ currentcontrolset \ services \ tcpip \ parameters, right-click the parameter in the blank on the right, select the left "New" -> DWORD value edge, name it "DefaultTTL", right-click the mouse and select "Modify" to change the value to 80 (hexadecimal) or 128.
Change the value of GlobalMaxTcpWindowSize to 7FFF.
12, speed up online neighbors
Open the registry editor and find HKEY_LOCAL_MACHINE/sofew.
are/Microsoft/Windows/current version/explore/remote computer/namespace，delete。
Under it are {2227A280-3AEA-1069-A2DE08002B 30309D} (printer) and {D6277990-4C6A-1F8D87-00060F5 BF} (plan)