Method 1: If the watch is soaked in water, it can be tightly wrapped with several layers of toilet paper or absorbent flannel, placed at about 15 cm near the 40-watt bulb, and baked for about 30 minutes, so that the water vapor in the watch can absorb moisture. Never bake the watch cover directly by the fire to avoid thermal deformation of the watch.
Method 2: the cover is inward, the bottom shell is outward, and it is worn on the wrist. After two hours, the moisture can be eliminated. If the water is seriously flooded, it is best to send it to the watch shop immediately to wipe the oil stain, remove the moisture from the movement and avoid the rust of the parts.
Method 3: Put the granular silica gel into a closed container together with the watch that has accumulated water. After a few hours, take out the watch and the accumulated water will disappear completely. This method is simple and economical, and has no harm to the accuracy and life of the instrument. Silica gel that absorbs water many times can be dried at 120℃ for several hours, and its water absorption capacity is renewable and can be used repeatedly.
Maintenance service address: Room 3003, 30th floor, Tianjin International Finance Center Building, Chifeng Road 136, Heping District, Tianjin.