The lattice laser system adopts the international advanced microlens technology, which can make the laser system produce a large number of tiny superpulse beams. After these ultra-pulse beams act on the skin tissue, tiny holes with a diameter of 0.12mm to1.2mm and a depth of 2mm can be formed on the skin. Therefore, a large number of micro-hot areas and heat storage areas or micro-hot areas can be formed on the skin, so that the epidermal pigment tissue can be gasified in different areas; In addition, the accumulation of heat in the dermis can make the skin collagen contract immediately and stimulate the proliferation of collagen for a long time, thus achieving the effects of wrinkle removal, scar removal, skin rejuvenation and solving skin problems such as abnormal pigment. This staged treatment can make the skin wound heal in a short time, and replace the defective and damaged tissues through the natural repair of the human body, thus producing newer and healthier tissues. Summary: Lattice laser is a new hot spot in recent two years, and it is also a new skin beauty technology that attracts worldwide attention. Dot matrix not only has the advantages of rapid and remarkable effect of invasive treatment, but also has the advantages of small side effects and short recovery time of non-invasive treatment, which combines the advantages of both. This technology is superior to similar products in removing scars, especially in treating hyperplastic scars, acne scars and stretch marks. Landmark patented technology and the application of dot matrix laser make laser scar removal safer and more effective. Each treatment only takes tens of minutes, which does not affect work, study and life. Not only that, dot matrix laser also has outstanding performance in acne, wrinkle removal and freckle removal. Ultra-pulse CO2 laser therapy machine, commonly known as "plastic and cosmetic photon knife" in the industry. In addition to the advantages of ordinary laser knife, it can also achieve the effect of "cold incision", especially suitable for pouch surgery, eyebrow cutting, wrinkle removal and so on. The incision was clean and tidy, and there was no cross infection during operation. When the laser power is reduced, it can be used to treat various pigmented nevus, spots and acne on the body surface. When the power is adjusted to a suitable operating range, it can also be used for fine cosmetic surgery on the face. It has the advantages of no bleeding, light swelling, light pain and quick recovery, and is welcomed by people who are prone to bleeding and those who want to work and move normally as soon as possible. Full computer control, digital man-machine interface, luxurious and beautiful, is a distinguished beauty assistant. Member of the National Laser Standards Committee ◆ The World Bank Health Project has won the bid for many times, and it is a domestic product that meets the international super pulse standard.
Compared with ordinary CO2 laser, high-energy ultra-pulse CO2 laser has many advantages, such as: ① less damage, avoiding the disadvantages of ordinary continuous CO2 laser, such as damage to surrounding normal tissues, eschar formation, and difficult wound healing, and the clinical healing process is not significantly different or even faster than conventional surgical methods; ② There was little bleeding, because the bleeding was stopped at the same time of incision, so there was almost no bleeding during the whole operation. Can provide bloodless vision for fine surgery; ③ The operation time is short, which avoids the trouble of hemostasis, and the wound does not need to be sutured, saving a lot of operation time. ④ The postoperative complications, hematoma and ecchymosis are less, the recovery is faster, and the impact on work and life is less, which is more acceptable to patients.
Structure: The therapeutic instrument consists of a main machine, a handle and a handle hanger. The main engine is equipped with cooling and radiating system, laser power supply and control system. This kind of machine is further improved after the completion of the first generation prototype, which is a kind of high technology. In order to reduce the user's hand-held burden (the handle weight is less than 0.75Kg), an independent suspension bracket is specially set up. The weight of the handle is completely balanced by the mechanism in the bracket, and the user only needs to control the direction without bearing the weight of the handle. Make the treatment simple.
Scope of application:
1. Various scars (surgical scar, burn scars scar, scald scar).
2. Remove pigment lesions (freckles, sunburn, senile plaque, sunburn, chloasma, etc.). )
3. Remove stretch marks.
4. Completely change the skin (tender skin, firm skin, shrinking pores, nodular acne)
5. Vascular diseases (capillary hyperplasia, rosacea)
Step 6 remove true and false wrinkles
Remove acne scars
Efficacy characteristics:
1. The operation is simple, the treatment is efficient and safe, there is no need to rest after operation, and the work will not be affected.
2. It can treat all parts of the body, with good effect, wide source of disease and rich benefits.
3. International new technology, combined with a large number of clinical experience accumulated light-based beauty means.
4. The output high point energy of this machine can reach 80mj, which is higher than that of similar products.
This machine consists of a main machine and a handle. Our company retains the original performance of erbium glass laser, but it is miniaturized and integrated into the handle, which not only saves the loss of optical fiber transmission, but also is very convenient to maintain.
6. The main components are imported from abroad, and a lot of innovations have been made in the structure, and the technical performance has reached the international advanced level. When changing the lamp, there is no need to change the main unit, just send the handle back to the manufacturer.
7. Non-exfoliative therapy is painless, short in time and without adverse reactions, especially suitable for young people.
8. The machine has three kinds of microbeam array outputs with different spot densities. They can be easily replaced on the handle. According to the density of each point, a variety of point energy levels are set to provide users with tailor-made treatment for different lesions, so as to achieve satisfactory treatment results.
9. This machine is controlled by a single-board computer and displayed on the 10.4 inch full-color screen. Equipped with soft keyboard, used to input patient case number, etc. In view of the characteristics that this treatment method needs multiple treatments, six treatment records are set for each patient in the scheme.
Technical parameters:
The model FB10600c/fg10600c FH10600c/fy10600c.
Wavelength 10600 nm
Laser? Radio frequency metal tube carbon dioxide lattice laser imported from America.
Operating system? Korean automatic intelligent control operating system
Excitation mode RF excitation
Output circle, square, ellipse, hexagon, rectangle, straight line and other graphics for you to choose!
Output mode? Lattice emission &; Scanning emission
Spot diameter? 0.08-0.12mm
Laser power? 10W, 30W or 60W (optional)
Cooling system air cooling circulation system
Aiming optical power ≤ 5 MW
Aim at the wavelength of light? 635 nm
Control panel? 10.4 inch color touch screen
Seven-joint torsion spring light guide joint arm for optical transmission system
Guide light source? Hong Guang semiconductor company
Point spacing? 0.1-2.0mm
Depth of treatment? 0.1-2mm
Working voltage? 220v/50hz110v/60hz
Net weight 60 kg 70 kg
Instrument size? 42cm×38cm× 1 17cm 53cm×38cm× 139cm