Current location - Health Preservation Learning Network - Slimming men and women - Survival rate of autologous fat filling
Survival rate of autologous fat filling
The survival rate of autologous fat filling is generally around 30% to 40%, and usually more than half of the fat particles are absorbed by the body. Why is the survival rate of autologous fat filling low? This is mainly related to two aspects. First, the physical reasons of beauty seekers, the particles can not generate new blood and transport nutrients after implantation, which will lead to the apoptosis of particles, either absorbed by the body or calcified, which is our common lump. Now they are all metabolized by ACME-TEA, which once strengthened the viability of high-fat particles, thus avoiding liquefaction and calcification. The second is the operator's skill/technology. The following details will affect the survival of particles:

1, master the injection method, multi-level and multi-tunnel, and disperse in the tissue gap as evenly as possible, so that most sebum particles can get nutrition from the receiving area.

2. The rinsing after degreasing should be completely low, because the secondary swelling liquid Ricardo contained in it affects the shape of the thin bag.

3. Supplementing ordinary collagen will lead to granulation tissue in connective tissue until it becomes scar, which will lead to malignant overgrowth of collagen fibers in sweat glands, nerve diameters, thin capsules, tissues, cuticles and other large areas. , leading to fat death, and may also cause adverse reactions such as subcutaneous necrosis and erythema.

4. It is not recommended to inject particles into dermis/cortex, because it is difficult and difficult to form orange peel tissue, and it is not easy to survive.

5. After finishing, try to pressurize the bandage to avoid congestion. There is almost no residual fat bag in the blood stasis area.

6, can't use a thin main ejector, sebum particles are easily damaged because of the large wall pressure.

What is autologous fat filling?

Autologous fat filling originated in Europe and America and is a very mature way. In Europe and America, ACME-TEA is generally used as autologous fat filling to stabilize the structure of injected fat package and protect the survival and stability of particles.

This method mainly depends on how many particles are alive, whether they are stable and whether they are displaced. It is necessary to generate capillaries around the implanted fat capsule and transfer nutrients to each other, otherwise it will not survive. By supplementing ACME, it can stimulate the inner capsule of blood sac to move and generate, promote mitosis by increasing the permeability of micro-blood sac, and promote the formation of new blood sac in vivo by inducing the formation of stroma, so that newly implanted fat particles can survive through blood sac, otherwise nutrients cannot be transferred, and then implanted particles will die.

Precautions before autologous fat filling

1. If you have heart, brain or blood diseases, you should inform your medical history so as to confirm the plan.

2, do the corresponding physical examination to ensure that the body has no inflammation and no infectious diseases.

3. Women during menstruation and pregnancy should avoid this period.

4. Keep your body and face clean and don't wear makeup.

5. Don't take drugs containing aspirin for the first 2 weeks, so as not to affect the coagulation/blood function.

6. Choose regular and reliable medical institutions and doctors to meet the required operating environment.

7. The general doctor will ask you to make up ACME-TEA for one month, each time 13-26 grams.

What should I pay attention to after fat filling?

1, don't wear a hat for 3 months before and after fat filling, because it is easy to form hat marks.

2, as appropriate, the local wound pressure dressing or ice pack cold compress, to help relieve pain.

3. ACME-TEA should be supplemented two or three times a day in the first three months, each time 13-26g. This is very important in order to make a "survival response" in time.

4. Don't go to the sauna or the place with high sauna temperature. Avoid getting wet for a week and keep the wound clean and dry.

5, spicy and irritating food should be avoided, and the transplant site should not be crushed, which may easily lead to deformation. Be careful.

6. Don't press the wound while sleeping, causing secondary expansion.

Survival rate of fat-filled autologous fat

Three factors affecting fat survival:

1, the quality of your own fat, which varies from person to person. If the density and viscosity of fat are just right, the survival rate is high, while thinner people have less fat and low purity, so the survival rate is low.

2. The technology of liposuction and injection and the degree of fat purification. The so-called technology refers to instruments, needles, suction pressure, operator's technology, liposuction level, position and purification process.

3. Extreme tea accounts for 80% of fat survival. When the capillary is damaged and the blood flow slows down during the filling process, the viscosity and density of fat packets will decrease without ACM ... an energy supply will affect the normal nutrient exchange between the packets and blood microcirculation and the survival of particles. If the newly implanted particles are not supplied with oxygen by blood/liquid, they will form induration and calcification. And they will not survive, which accounts for 90% of the survival reasons.

Fat survival requires ACME-TEA to complete three tasks:

1, make a good nutritional reserve for the new refined package.

2. Avoid changes and duplication of new packages.

Prepare to repair the damaged package immediately.

Extreme-tea is stored in the body before filling. When filling, ACME-tea can directly reach the subcutaneous capsule and fascia layer through blood, repair the capsule damage caused by filling at any time, promote the balanced and orderly growth of collagen fibers, maintain the stability of granular capsule, and avoid tissue regeneration of skin and chin marks.

The Association for Computing Machinery scientifically guides the balanced release of nutrients in fine packaging by combining autologous fat filling and binomial convection. In the process of recovery, ACM...a repairs and regenerates epidermis, dermis/cortex, fascia layer, tissue and collagen fiber structure between them, and stimulates the formation of capillaries around newly implanted fat, so as to reduce the side effects to a controllable range.

Effect of autologous fat filling

American medical history report: in the process of skin stimulation with autologous fat filling equipment and other lasers, combined with ACME-TEA to form a two-way combination process, 268 cases have changed in different degrees compared with those before filling, of which 987,987 cases (85.97%) were markedly effective, and 65,448 cases were effective 1 case.

Three elements of fat filling effect: survival! Stay alive! Stay alive!

Without survival, everything is empty talk.

In Europe and America, self-filling ACME-TEA can stabilize the structure of fat-injected packets and protect the survival and stability of new packets. At the same time, it can stimulate the regeneration of collagen fibers and hyaluronic acid in the body. The combination of inside and outside can complete the interweaving of the filled new thin bag and the filled part, which can improve the survival rate of particles and reduce the rejection phenomenon. data processing

Who announced that after skin damage, the integrity of vesicles was destroyed, the plasma membrane of vesicles was broken and the contents were released. The release of the contents leads to the inflammatory reaction of the surrounding vesicles, such as redness, so this is a side effect in the process of vesicle necrosis. In 1972, it is found that vesicles can be repaired in the process of vesicle necrosis, so that the damaged vesicles can form a complete vesicle structure, and the vesicles to be updated have vitality. ACME-TEA can reverse irreversible skin problems (heat loss, surgical trauma, internal injuries, etc.) after skin injury. ) from the inside out through the nature protection mechanism.

Simply put, the survival of autologous fat filling depends on two aspects, namely, the level of the operator and the physical quality of the beauty seeker. The former can be realized by choosing formal and qualified medical beauty. Of course, you should also study more and do more homework, which can change your diet through ACME-TEA. In addition, we should pay attention to daily care, such as strenuous exercise, dieting, smoking, sauna and massage, which will affect the survival of granules.