Golf positioning skills

Ball position refers to putting the ball in different positions between the feet according to the different clubs. It is an important link related to the body, arm and club in the preparation of hitting the ball, and also closely related to the grip mode, body shape (height and thinness) and swing type (left pull ball, left curve ball, right push ball and right curve ball), especially affecting the swing path and swing plane.

Most players pay little attention to the position of the ball. They believe that no matter where the ball is placed, it can accurately hit the lowest point of the swing arc through eye adjustment, but this adjustment will inevitably lead to the use of hand and wrist muscles.

The position of the ball is also related to the swing trajectory. Generally, the swing action of the iron core is to hit the ball at a downward angle, that is, the lowest point of the swing arc should be in front of the ball position; After hitting the ball, the club head digs down the draft sign and digs up the turf in front of the ball position. This kind of ball will turn upside down when it falls on the green. If the ball goes to the left, that is, the club head hits the ball through the lowest point of the swing arc, will it? Thick? Or? Thinner? .

In modern golf, there are two ways to determine the position of the ball.

1. Jack nicklaus ball position

Jack nicklaus's ball position refers to the method of keeping his left foot still and moving his right foot to the right with the decrease of the number of clubs to determine the ball position. At the same time, the smaller the number of bars, the more backward the right foot moves, and the closed standing posture is adopted; The greater the number of poles, the more the right foot moves forward and adopts an open posture.

2. Ben Hogan Station

Ben-Hockenheim ball position is a method to determine the ball position by slightly adjusting the center of the foot to the left and right according to different clubs, but the same swing action must be maintained. According to the length of the shaft and the inclination of the shaft surface, different distances and trajectories are played. In other words, the shorter the club, the more to the right. Because the short club face has a large inclination and different structure, the ball position must be to the right if you want to hit the ball at a downward angle.

Related reading? Maintenance skills of golf clubs

Iron maintenance

Iron bars will rust when used for a long time. In particular, the surface of the sand wedge will become rough and dull, just to achieve excellent rotation performance, and it is these rusty surfaces that are loved by many top professional players. Although there are many kinds of surface designs to protect the club face, all clubs must be thoroughly cleaned before being stored after they are not used for a long time or used in wet places. If you want to prevent the rod surface from rusting, you can wipe it with cleaning lubricant.

Wipe the handle

Because the grips of golf clubs have adsorption properties, they may adsorb dust and sweat on gloves or hands. But this will not affect the function of the grip.

When wiping the grip, first touch a small amount of water or alcohol with a soft towel, and then gently wipe the grip. Please don't completely soak the towel. Or use a hard brush and soapy water to clean the grip, because doing so will damage the surface of the grip and destroy the stickiness and anti-skid effect of the grip.

Please don't soak the Wei Ying handle in the bucket for cleaning. Doing so will wet and destroy the inner layer of the grip.

Rainy weather

When playing with the grip in rainy days, please try to keep the grip dry. If the handle is wet, please dry it with a soft dry towel. Please don't scrub the grip with a towel, because doing so will damage the surface of the grip and destroy the stickiness and anti-skid effect of the grip.

In the process of playing ball.

Whenever caddies report to the starting station, the first thing they do is to take off all the club caps so that they can take the clubs every time. No.65438 +0 wood doesn't matter with fairway wood, and the club cap of putter must not be taken off. This laziness is a crime. After all, the putter is a guy who lives on the face of the club. Please remind the caddy before leaving the club to ensure that the life of the putter is increased by at least one year.

Speaking of broken societies, there is another phenomenon that has to be mentioned. Many carbon clubs will break near the grip. This problem is more due to the incorrect taking of the rod from the ball bag. Neither you nor the caddy can straighten the rod out of the bag, more because you didn't touch the grip and pulled it out obliquely. It doesn't matter once in a while After a long time, the fragile carbon axis can't help being tortured like this.

This bag is on consignment.

Wrap the club tightly in the bag with a towel. The main reason for the fracture of the club head is the collision during transportation, and the towel plays a role in reducing vibration here. Wrapping the club with soft objects can not only protect the fragile wooden head, but also protect the face of the iron. For the iron surface forged by soft iron, once it bumps, it is easy to bump, which will definitely lead to the stability and accuracy of iron, even including the distance, especially the special iron surface, which is extremely expensive.