Part 1: synthetic zipper

(1) Open the portrait and zipper materials and copy the zipper to the portrait, as shown in the figure.

(2) Set the blending mode of the zipper layer to positive superposition, and then use Ctrl+T to freely transform and adjust its size and position. The effect is shown in the figure.

The second part: skin grinding

?

(1) Hide the zipper layer, return to the portrait background, enter the channel, and copy the blue channel.

(2) Perform Gao Fancha reservation and set the radius to 30, as shown.

(3) The blue copy channel runs. Execute the menu command "Image/Application Image" and set the mode to strong light, as shown in the figure.

(4) curve adjustment. Hold down the Ctrl key, click the blue copy channel to load the selection, and then Ctrl+Shift+I deselect the dark spots. Click the RGB channel to return to the layer and create a new curve adjustment layer, but don't adjust it yet.

Create a black and white adjustment layer, keeping the default parameters. Then go back to the curve adjustment layer and drag the curve to make most spots disappear.

(5) Eliminate new spots. Hide the black and white adjustment layer, and you can see new yellow spots appear.

Poke the layer and implement the "noise/noise reduction" filter to eliminate the noise.

(6) find skin texture. After the variegated color is removed, the texture is lost. Now we will restore the texture. The hidden layer only displays the portrait background, then enters the channel, selects the red channel, selects all with Ctrl+A, and then copies the image with CTRL+C. ..

Go back to the layer, display the stamping layer 2, and Ctrl+V paste the image on it. Then execute the Other/Gao Fancha Reservation filter and set the radius to 1 pixel.

Change the layer blending mode to bright mode, and the effect is as shown in the figure.

I feel a little weak. Duplicate Layer 3 and adjust the opacity as needed. The effect is shown in the following figure:

(7) Restore hair and eyes. The texture has been restored, and now it needs to be restored to eliminate the changes in hair and eyes caused by noise and bright mode. Punch that layer to obtain lay 4. Hide all layers below layer 4 except the background layer. Create a layer mask for Layer 4, edit the mask with a brush, and restore the eyes and hair.

(8) Remove residual stains. Poke the layer again. Then the zipper layer is displayed, and the residual spots and black spots on the skin in the zipper opening area are removed with a repair brush.

The third part: skin whitening adjustment

?

Now the skin at the opening has no dark spots, and it is smooth and delicate. Below we will further make it white and tender, which is in obvious contrast with the original picture.

(1) Organize the layers. Create two new groups, named Skin and Adjust, as shown below.

Drag layer 5 to the adjustment group and layer 4 to the curve 1 to the grinding group. Hide the dermabrasion group as shown below

(2) Create a mask for the adjustment group. Click the layer 1 (zipper layer), use the magic wand tool to select the opening area of the zipper, and pay attention to adding the transparent area, as shown below.

Click the adjustment group and click the "Add layer mask" button below the layer panel to add a mask for the adjustment group, as shown in the figure.

(3) Use curves to make skin smoother and more uniform. Click Layer 5, press Ctrl+Alt+2 to load its highlighted selection, and then Ctrl+Shift+I invert it to create a curve adjustment layer.

Change the layer blending mode to color filter, and adjust the opacity until it is satisfactory, as shown in the figure.

(4) Reduce the yellow color in the skin color, so that the skin color echoes the eye color. Create an optional color adjustment layer, first select yellow and reduce yellow; Then choose neutral color, increase cyan appropriately to reduce yellow; Then choose cyan to increase the cyan in the eyes; Finally, choose black, increase cyan and decrease yellow. Adjust the reference and effect as shown.

(5) Reduce the red saturation and make the skin whiter. Create a hue/saturation adjustment layer and select red to reduce its saturation. The effect is as shown in the figure.

(6) darken the skin at the sharp corner of the zipper. Create a curve adjustment layer, adjust the curve, and edit the skin at the dark corner of the mask, as shown in the figure.

(7) Use the soft light layer to refer to the original image to improve the stereoscopic impression. Create a layer filled with neutral gray (RGB is 128), set the mode to soft light mode, and then paint black where it needs to be darkened with a soft brush. Note that the opacity and fluidity of the brush need to be set smaller, which can be within 30%. The effect is shown in the figure.

Part IV: Add products and words.

?

(1) Create a new group and name it Text and Product.

(2) increase products. Open the product material, use the quick selection tool to select the product, and then copy it into the portrait, and freely transform and resize it until it is suitable. As shown in the figure.

(3) add text. Select the text tool, set the font to Jing Lei font, and enter the text "Open Your Beauty". Adjust the position and size, the effect is as shown in the figure.

(4) Add decorative lines. Create a new layer and use the pen tool to draw a wave path. Select a brush, set the brush size to 3 pixels, hardness to 100%, opacity and flow to 100%, and click the "Stroke the path with a brush" button on the path panel to stroke the path. The effect is shown in the figure.

Adjust the position of the layer, put the line under the product and text, and then copy one, as shown in the figure.

(5) Fine-tuning to obtain the final effect. According to your own judgment, you can fine-tune the values of each tone layer until you are satisfied.

This requires more practice, mainly to master this method, and everything else can be applied.