2. Put the paper neatly in the plastic film, and try to center the paper up and down (or vertically and horizontally).
3. Connect the power supply of the laminator and adjust the laminator mode. Plastic packaging (hot packaging) needs to be preheated for a few minutes before it can be used (the red display light will be on), and cold packaging can be used without heating.
4. When the green light indicating "Work" is on, it means that preheating is completed and plastic packaging can be carried out.
5. The following steps are the same as plastic packaging and cold mounting. After confirming that the paper is flat, we slowly put the paper into the molding machine. Don't tilt the paper, try to keep it at 90 degrees (vertical angle) through the plastic machine.
6. After putting a short piece of paper, the plastic molding machine will automatically start the plastic sealing process. If adjustment is needed during plastic packaging, you can press Reverse to return to adjustment.
7. Finally, the plastic packaging effect diagram. After the plastic packaging is completed, the plastic film will closely adhere to the paper, thus maintaining the color of the paper, and the colored paper will even become brighter and brighter after plastic packaging.