The thin mode is converted to the fat mode.

After 1 AP is started, log in from the console port with baud rate of 9600. The default account number is admin and the password is admin@huawei.com.

2 After successful login, the default IP address of AP is169.254.1.116; We can set the IP of the computer to the IP of the same network segment, such as169.254.1.2/16, and then directly connect the computer network port to the AP network port; After the IP setting of the computer is completed, enter the following commands in turn:

? Ap mode switching preparation

? Ap mode switch check

? AP-mode-switch TFTP fatap 3 x 10XN _ v200r 005 c 10 SPCA 00 . bin 169 . 254 . 1.2//TFTP？ Then follow the full name of fat AP file, and then follow the address of TFTP server; After the command input is completed, AP will automatically download the specified file from TFTP server. After the file is downloaded, you need to confirm it manually, enter y, and then the AP will automatically restart; During the restart process, AP will automatically load new files and upgrade them.

3 ? After the restart, we log in to the AP and enter the display version? After confirming that the version is our upgraded version, it can be considered that AP has been upgraded to fat mode.

The fat mode is converted to the thin mode.

A. After the AP is started, log in from the console port, and the login password of the console port is required for the first login;

B. After setting the console password, enter the system mode; The default network port of AP is vlan 1? We only need to configure the IP address of vlan 1, which can be used for communication with TFTP server or remote management. In this example, we will vlan 1? The IP address of is set to? 172.16.10.124, and the IP address of TFTP server is set to172.16.10.2/24.

Then, let's enter the commands in turn and start converting the AP:

Ap mode switching preparation

Ap mode switch check

AP-mode-switch TFTP fitap 5 x 10XN _ v200r 005 c 10 SPC 700 . bin 172. 16. 10.2？ //After TFTP, first follow the full name of the thin AP file, and then follow the IP address of the TFTP server; After entering this command, TFTP will automatically download the upgrade file; After the download is completed, you need to manually confirm, enter y, and then the AP restarts and starts the upgrade;

D. After the upgrade, we log in to (admin/admin@huawei.com with the default account and password of the thin AP, and then enter the display version to confirm that this version is our upgraded version, so we can assume that the AP has been upgraded to the thin mode.