Step 2: Open the brush tool, find the installed ink-jet brush, create a new layer, set the foreground color, and click to draw the ink-jet effect background;
Step 3: open the poster theme picture, drag it in, and ctrlt adjusts the size and position;
Step 4: ctrl clicks on the inkjet material layer to load it into the selection area, and selects the theme picture layer to create a new "layer mask";
Step 5: use the "text tool" to mark the poster theme slogan and add text effect;
Step 6: "File-Save as …" JPG format picture, and the printing is finished.
Extended data:
1, title: The title should focus on the content, so that people can see it at a glance.
Be eye-catching, distinctive, novel and concise. The font must be large, accounting for half of the newspaper, and the brighter the color, the better.
2. Text: clearly explain the nature of the activity, information introduction, commodity sales, etc. , and clearly indicate the price and promotion.
If it is a performance poster, it is necessary to write clearly the actors, operas, plays and so on.
3. Time: place, cost. The time and place of the event must be clear.
4. End: Start a new line and write your signature. Write the year, month and day under the name.
How to make a poster with ps _ How to make the text on the poster with PS 1 Create a new canvas
File-New or Shortcut Control
● Poster settings are as follows:
● The leaflets are set as follows:
Press OK to enter the operation area.
Second, load the image.
It is very important to choose a map. Spray-painted posters are more qualified than hand-painted ones. So choose pictures as close as possible to the theme of the poster. Still fresh and simple. Can be attractive enough. Try not to be too complicated or too dark. It should be noted that no matter whether it is an inkjet poster or a hand-painted poster, the characters are the protagonists. Image is just a foil. 1, ① file placement
(2) File-Open. Drag the open diagram into the new operation area. Note: If you want to drag the opened picture to the newly created operation area, please note that the icon selected in the toolbar is
Note: Toolbar:
This is a new operating area.
2. The loaded image can be resized. ① Edit-Transform-Zoom ② Press CtrlT.
Note: Keep the image shape unchanged. You can hold down the Shift key and resize the image.
3. If the loaded image is a bitmap (bitmap: the file suffix is. Wait a minute. ), the pixels should be high. At least a few hundred. Because the poster is big. If the pixels are not high after magnification, they will be blurred and the original effect you want will not be achieved.
Zoom in to the actual pixel, blurred, not as clear as before. )
If the loaded image is a vector diagram (vector diagram: the file suffix is. Wait a minute. You don't need to pay attention to pixels.
No matter how magnified, the vector diagram will not be distorted and blurred.
The newly loaded image is an adjusted image.
Note: You can view the image after zooming in to the actual pixel through the toolbar.
17.8% represents the actual pixel size of the image displayed on the screen.
Third, add words
The words on the poster are the most important part of conveying information. So the main information such as the title should be eye-catching.
Used for toolbars.
1. Click the right mouse button on the icon.
You can add horizontal text and vertical text. (Masking tools can be learned later)
2. After entering the text, double-click the layer you edited in the lower right corner of the screen.
You can finish editing.
Or click on the tool options bar.
Note: ① Tool Options Bar. You can choose any tool in the toolbox. The toolbar under the menu bar will change accordingly.
This is the tool options bar of the text tool.
There are too few original fonts on the computer. Fonts can be downloaded online. You can also ask me for it.
The same is true of brushes. You can download all kinds of brushes online. Such as clouds and patterns.
There are many resources that can be downloaded directly through the network to avoid complicated workflow, and those who are interested can study further in the future.
Select a font and change the font size and color.
(2) Adjust the parking window plate.
3, add effect to the text
Double-click word layer
Palette (refers to the intermediate workspace)
You can edit the selected text as needed.
Note that when you want to edit a text layer, you must first select it. Even if the text layer is selected.
Blue is selected. Just click the word layer you want to select to select it.
Note: The eyes on the left represent visibility. If you don't need a layer for the time being and want to hide it, just click your eyes.
When you have finished editing the desired layer style, press OK.
I hope you can do all kinds of layer styles yourself. I won't explain it here. If you have any questions, you can Baidu or ask me.
For example, "fish every year" has been adjusted like this:
Differences in text effects:
4. Transform the text (still on the premise that the layer is selected)
(1) toolbar line selection
Pay attention to the horizontal and vertical directions. Use it according to whether you add a horizontal or vertical typesetting layer.
(2) Edit-Transform-Deformation
Button to change the horizontal or vertical deformation. Press after deformation.
It's done.
5. To move each layer and text layer, please select it first.
Then move the layer and the text layer.
Note: The style and deformation of the text layer also apply to the layer.
Fourth, storage
Files are stored as or ShiftCtrlS.
Select the saved directory, change the text name, and most importantly, the storage format.
There are three commonly used:
① stored in PSD format.
Just press OK. All the layers of the file saved in this way are reserved, and you can edit and modify it on the original basis after opening it with PS. However, files in this format will take up a lot of space. If there are no images to edit, you don't need to save them as PSD to save space. ② Store in JPG format.
Just click OK again, you don't need to change any options. Images saved in this way are very common in JPG format. Small occupied space. General inkjet posters can be saved in JPG format. However, some colors in JPG format will be distorted. After saving and viewing, you will find that some colors are not satisfactory in the previous operation, which is the difference between JPG and the third TIF. In contrast, files in JPG format occupy less space than files in TIF format. ③ stored in TIF format.
The option has been changed, as shown in the figure. It is recommended to store the painted posters in TIF format when spraying in the store. Although it occupies more space than JPG, the color is not distorted.
Note: After painting the poster, it is recommended to save the image in two formats, one is PSD and the other is TIF. The former is to prevent the need to edit changes.
An inkjet poster, the simplest process is probably like this.
Others, such as the functions of various tools in the toolbar and the functions of various options in the menu bar, I hope you can try it yourself during the production process, or ask others if Baidu doesn't understand. Because PS is strong, we are small. I don't know what to say, so I concentrate on practical exercises. Besides, things like tutorials, though seemingly tedious, are really useful. You can draw according to the steps of the tutorial, so you can remember it faster.
Next, let's briefly talk about the functions of several tools.
A, rectangular box selection tool
Select a part of the image to edit. Such as copying, cutting, etc. , and you can also change its color.
Note: color change: image-adjustment-hue/saturation.
Second, lasso tools
Similar to the rectangular marquee tool. The difference is that the lasso tool can choose irregular patterns.
Third, the tool.
Note: If you want to cancel the previous operation.
① Edit-Restore State Change/Forward/Backward ② Window-History to call up the history window. If you don't need to cut this step, just click on the deformed text above to restore the state before cutting. You can also click Move to directly restore the state before the deformed text.
Fourth, paint bucket tools
Used to fill the background.
Verb (abbreviation for verb) brush tool
Six, eraser tools
Both can be as the name suggests.
Note: Any tool with a small black triangle in the lower right corner can pop up more tool options by clicking the right mouse button.
How to make poster tools/materials with PS
computer
To modify (a picture or photograph) with a computer.
0 1
Open the PS software and create a new 950*500 white canvas, named 950 poster, as shown in the figure;
02
Fill the foreground color with blue, and then click the rectangle tool to draw a shape of appropriate size on the white canvas, as shown in the figure;
03
Fill the foreground color with bright yellow, and then click the rounded rectangle tool to draw a small shape on the blue canvas, as shown in the figure;
04
Select the shape layer that has been painted bright yellow, and then copy two of them to move the shapes to the appropriate positions, as shown in the figure;
05
We fill the foreground with white again and draw a rectangle with a rectangle, as shown in the figure;
06
In the lower right corner of the white rectangle, insert a small triangle as a shadow effect, then enter the text of the main title on it (note that the text of the main title should not exceed 6 words), and finally fill the font color with blue.
07
In the space below the main title, insert six box checkmarks respectively.
08
After these symbols come, introduce the product-related functions. Other related words can be entered as required. The blue background font is white, and the bright yellow background font will be more eye-catching, as shown in the figure;
09
Finally, insert the product picture that needs to be used as a poster, and a perfect poster will be made.