Looking through the wardrobe, there are many old jeans that don't fit. If you want to do something cool, you can do it yourself. The following is the cutting method of irregular jeans feet that I sorted out for you. I hope you like it!

Step 1: If the trousers are long, you need to make a mark if you want to DIY them into irregular jeans with nine points and eight points.

Step 2: If you want to make a style with short front and long back, fold it in half and cut it according to the mark, as shown in the figure. (It can also be cut into irregular triangular trouser legs. )

Step 3: Here comes the point. Use small scissors with hooks to polish the trouser legs and take out some Mao Mao (sandpaper is more effective). It is best to pad a piece of cardboard to prevent the back of trousers from being scratched.

Step 4: Next is the time to dig a hole? According to your own ideas, you can break it where you want.

Step 5: Start the rotation with hook scissors, and then polish it with scraper (sandpaper). If you like the feeling of being broken, you can cut a circle around the hole with scissors and polish it. Remember to put a piece of cardboard in it ~

Step 6: After cutting the small hole, remember to mark the position first. The position of the hole will be according to your own preference ~

Step 7: continue to rotate and polish to make a tassel feeling.

The making of ripped jeans starts with cutting (cutting) a slender hole where you want to make a hole.

Tear the slender slit into a satisfactory state by hand.

Then cut some small holes near the edge of your torn mouth to create a friction effect.

Your hand once again tore these small mouths into a natural state. That's it!

The method of homemade ripped jeans will prepare all the materials needed to make ripped jeans, such as unused jeans, scissors, cardboard, sandpaper, tweezers and so on.

According to your own preferences, plan the places where jeans are going to be torn, such as calves and thighs, and then polish them properly with sandpaper to make them old and white and make the holes look more natural.

After polishing, cut a certain length of parallel incision on it with scissors, and be careful not to be too long, so as not to make the pants feel torn. In addition, before simple use, you can pad a piece of cardboard inside to avoid cutting the back of your pants because of excessive force.

After cutting, you can pour a proper amount of cold water into the washing machine, and then put the cut pants in and wash them for about 15 minutes. On the one hand, it can remove the dirt on the pants, and on the other hand, it can make the parallel cut just cut look much more natural.