Windows blue screen error code explanation
Blue screen error code When we use Windows, blue screen is very common. Most of the time, it can only be reset. Now, the meaning of the blue screen error code is published for use.
Numerical narration
0 0x0000 job completed.
1 0x000 1 incorrect function.
2 0x0002 The system cannot find the specified file.
3 0x0003 The system cannot find the specified path.
4 0x0004 The system cannot open the file.
5 0x0005 Access denied.
6 0x0006 Invalid code.
7 0x0007 The bank control block has been corrupted.
8 0x0008 There is not enough storage space to process this command.
9 0x0009 The address of the storage control block is invalid.
10 0x000A environment is incorrect.
1 1 0x000B tried to load a malformed program.
Error in 12 0x000C access code.
13 0x000D data error.
14 0x000E does not have enough storage space to complete this operation.
15 0x000F The system cannot find the specified drive.
16 0x00 10 cannot delete the directory.
17 0x00 1 1 The system cannot move files to other drives.
18 0x00 12 has no file.
19 0x00 13 storage medium is write-protected.
20 0x00 14 system cannot find the specified device.
2 1 0x00 15 device is not ready.
22 0x00 16 device cannot recognize this instruction.
23 0x00 17 data error (cyclic redundancy check)
24 0x00 18 program issued a long error instruction.
The 25 0x00 19 drive cannot find a fixed sector or track on the disk.
26 0x00 1A cannot access the specified disk or floppy disk.
27 0x00 1B drive cannot find the required volume.
28 0x00 1C printer has no paper.
29 0x00 1D system cannot write data to the specified drive.
30 0x00 1E system cannot read the specified device.
3 1 0x00 1F The device connected to the system is invalid.
32 0x0020 The process cannot access the file because another process is using it.
Part of the file 33 0x002 1 is locked and cannot be accessed now.
The floppy disk of drive 34 0x0022 is incorrect. Please insert %2 (volume serial number: %3) into disk drive% 1.
36 0x0024 There are too many open shared files.
38 0x0026 Reached the end of the file.
39 0x0027 Disk is full.
50 0x0032 does not support this network request.
5 1 0x0033 The remote computer cannot be used.
52 0x0034 Duplicate network name.
53 0x0035 The network path cannot be found.
54 0x0036 The network is busy.
55 0x0037 The specified network resource or device is no longer available.
56 0x0038 The network BIOS command limit has been reached.
57 0x0039 There is something wrong with the network adapter.
The server specified by 58 0x003A cannot perform the requested operation.
An unexpected error occurred in the 59 0x003B network.
The 60 0x003C remote adapter is not compatible.
6 1 0x003D printer queue is full.
The space of the 62 0x003E server cannot store the files waiting to be printed.
63 0x003F The file waiting to be printed has been deleted.
64 0x0040 The specified network name cannot be used.
65 0x004 1 Access to the network is denied.
66 0x0042 The network resource type is wrong.
67 0x0043 The network name cannot be found.
68 0x0044 exceeds the name limit of LAN adapter.
69 0x0045 exceeds the limit of network BIOS session.
70 0x0046 The remote server has been paused or is starting.
7 1 0x0047 cannot connect to this remote computer at this time because the number of connections has reached the maximum.
72 0x0048 The specified printer or disk device has been suspended.
80 0x0050 file already exists.
82 0x0052 Unable to create directory or file.
83 0x0053 INT 24 failed
84 0x0054 The storage used to process this request cannot be used.
85 0x0055 The name of the near-end device has already been used.
86 0x0056 The specified network password is incorrect.
87 0x0057 parameter error.
88 0x0058 A data write error occurred in the network.
89 0x0059 At this time, the system cannot perform other trips.
100 0x0064 Unable to create other system signals.
10 1 0x0065 belongs to the semaphore dedicated to other trips.
102 0x0066 semaphore has been set and cannot be closed.
103 0x0067 Unable to specify semaphore.
104 0x0068 Unable to request a dedicated semaphore during the interrupt.
105 0x0069 The previous ownership of this semaphore has ended.
106 0x006A Please insert the floppy disk into% 1.
107 0x006B The program has stopped because the replacement disk is not inserted.
108 0x006C disk is in use or locked.
109 0x006D pipeline has been aborted.
1 10 0x006E The system cannot open the specified device or file.
The file name of 65438+110x006f is too long.
1 12 0x0070 Insufficient disk space.
1 13 0x007 1 No internal file identifier is available.
1 14 0x0072 The target internal file identifier is incorrect.
1 17 0x0075 The IOCTL of the application call is incorrect.
1 18 0x0076 The value of the write verification parameter is incorrect.
1 19 0x0077 The requested command is not supported by the system.
120 0x0078 This function is only valid in Win32 mode.
12 1 0x0079 semaphore exceeded the timeout period.
122 0x007A The data area passed to the system call is too small.
123 0x007B file name, directory name or storage label syntax error.
124 0x007C system call hierarchy is incorrect.
125 0x007D disk is not marked.
126 0x007E cannot find the specified module.
127 0x007F cannot find the specified program.
128 0x0080 There is no sub-trip to wait.
129 0x0081%1This application cannot run in Win32 mode.
130 0x0082 attempted a non-original disk I/O operation using the file handle of the open disk partition.
13 1 0x0083 tried to move the file pointer before the beginning of the file.
132 0x0084 Unable to set the file pointer on the specified device or file.
133 0x0085 JOIN or SUBST command cannot be used for previously bound disk drives.
134 0x0086 Try to use the JOIN or SUBST command on a combined disk drive.
135 0x0087 Try to use the JOIN or SUBST command on the replaced disk drive.
136 0x0088 The system tried to delete the link relationship of the unlinked drive.
137 0x0089 The system tried to delete the replacement relationship of the unreplaced drive.
138 0x008A The system tried to add the drive to the directory where the drive has been added.
139 0x008B The system tried to replace the drive with the directory of the replaced drive.
140 0x008C system tried to replace the drive with the directory of the replaced drive.
14 1 0x00 The system tried to replace the drive with a combined drive directory.
142 0x008E system cannot perform JOIN or SUBST at this time.
143 0x008F system cannot merge drives or replace directories under the same drive.
144 0x0090 This directory is not a subdirectory of the root directory.
There is still data in the 145 0x009 1 directory.
The path specified by 146 0x0092 has been replaced.
147 0x0093 Insufficient resources to process this instruction.
The path specified by 148 0x0094 cannot be used at this time.
149 0x0095 The drive directory you are trying to merge or replace is the target that has already been replaced.
150 0x0096 configuration. SYS file does not specify system tracking information, or the tracking function is cancelled.
15 1 0x0097 The number of semaphore events specified is incorrect.
152 0x0098 DosMuxSemWait not executed; Too many semaphores are set.
153 0x0099 DosMuxSemWait list is incorrect.
154 0x009A The storage medium symbol length limit you entered.
155 0x009B cannot create another thread.
156 0x009C receives the trip rejection signal.
157 0x009D has been discarded and cannot be locked.
158 0x009E sector has been unlocked.
The address of 159 0x009F thread ID is incorrect.
160 0x00A0 The quoted numeric string passed to DosExecPgm is incorrect.
16 1 0x00A 1 The specified path is incorrect.
162 0x00A2 signal waiting to be processed.
164 0x00A4 system failed to create thread.
167 0x00A7 failed to lock some files.
The resource requested by 170 0x00AA is in use.
173 0x 0ad The locking requirement of the cancellation range is not obvious.
174 0x00AE file system does not support automatic change of lock type.
180 0x00B4 system found an incorrect segment number.
182 0x00B6 The operating system cannot execute% 1.
The file 183 0x00B7 already exists. Cannot create the same file.
The flag sent by 186 0x00BA is wrong.
The system flag specified by 187 0x00BB cannot be found.
The operating system of 188 0x00BC cannot execute% 1.
189 0x00BD operating system cannot execute% 1.
The operating system of 190 0x00BE cannot execute% 1.
19 1 0x00BF cannot execute% 1 in Win32 mode.
The operating system of 192 0x00C0 cannot execute% 1.
193 0x00c1%1is not a correct Win32 application.
The operating system of 194 0x00C2 cannot execute% 1.
The operating system of 195 0x00C3 cannot execute% 1.
196 0x00C4 operating system cannot run this application.
The 197 0x00C5 operating system cannot run this application at present.
The operating system of 198 0x00C6 cannot execute% 1.
199 0x00C7 operating system cannot run this application.
200 0x00C8 code segment cannot be greater than or equal to 64KB.
20 1 0x00C9 operating system cannot execute% 1.
202 0x00CA operating system cannot execute% 1.
The 203 0x00CB system cannot find the entered environment option. \\r
205 0x00CD is in the instruction subdirectory, and there is no signal subprocessor for any trip.
206 0x00CE file name or extension is too long.
207 0x00CF Ring 2 stack is in use.
208 common file name of 0x00D0 entered * or? Incorrect, or too many common file names have been specified.
The signal sent by 209 0x00D 1 is incorrect.
2 10 x00d 2 cannot set the signal processor.
Part 2 12 0x00D4 is locked and cannot be reconfigured.
2 14 0x00D6 There are too many dynamic link modules attached to this program or dynamic link module.
2 15 0x00D7 cannot \ "\" call LoadModule nested.
230 0x00E6 pipeline status is invalid.
23 1 0x00E7 All pipeline instances are busy.
232 0x00E8 pipeline is closing.
There is no process at the other end of the 233 0x00E9 pipeline.
234 0x00EA has more information available.
The 240 0x00F0 session was cancelled.
254 0x00FE The extended attribute name specified is invalid.
The properties of 255 0x00FF extension are inconsistent.
259 0x0 103 No data.
266 0x0 10A cannot use the replication API.
267 0x0 10B directory name is wrong.
275 0x005438+0 13 extended attribute does not apply to buffer.
276 0x005438+0 14 The extended properties file on the external file system is corrupted.
277 0x005438+0 15 extended property sheet file is full.
278 0x005438+0 16 The specified extended attribute code is invalid.
282 0x005438+0 1A This file system does not support extended attributes.
288 0x0 120 intends to release a mutex that does not belong to the caller.
298 0x0 12A signal has been transmitted too many times.
299 0x0 12B only completed some requirements for reading/writing ProcessMemory.
3 17 0x00 13d system cannot find the message with the number 0x% 1 in the message file %2.
487 0x0 1E7 attempted to access an invalid address.
The operation result of 534 0x02 16 exceeds 32 bits.
535 0x02 17 has a journey to get and release data at the other end of the channel.
536 0x02 18 Wait for the stroke to open the other end of the channel.
994 0x03E2 Access to extended properties was denied.
995 0x03E3 I/O operation terminated abnormally due to thread termination or application request.
996 0x03E4 Overlapping I/O event is not set to notification status.
997 0x03E5 is processing overlapping I/O jobs.
998 0x03E6 Invalid access to memory location.
999 0x03E7 An error occurred while executing an in-page job.
Windows blue screen of death Analysis and Solution
In the process of using Windows, you often encounter the phenomenon of blue screen. For beginners, this is like a computer disaster, and they are at a loss. In fact, as long as you understand the reason, you can prescribe the right medicine. There are many reasons for the blue screen, which can be summarized as follows:
1. The screen display system is busy. Please press any key to continue ...
1. Insufficient virtual memory leads to system multitasking error.
Virtual memory is a unique method to solve the shortage of system resources in WINDOWS system. Generally, the remaining space of hard disk in the main boot area is required to be 2-3 times of its physical memory. In order to make full use of space, some enthusiasts cram their hard disks full and are busy remembering the harsh requirements of WINDOWS. As a result, the virtual memory has an operation error due to insufficient hard disk space, and a blue screen appears. To solve this problem, it is very simple. Try not to fill the hard disk, and often delete some temporary files and swap files generated by the system to free up space. Or you can manually configure the virtual memory, select Advanced, and transfer the default address of the virtual memory to another logical disk. This can avoid the blue screen caused by insufficient virtual memory.
2, CPU overclocking leads to operational errors.
Overclocking is a common occurrence for enthusiasts, so various failures caused by overclocking are inevitable. Overclocking itself is to achieve higher performance on the original basis. However, due to overload operation, too many internal operations and overheating of CPU, the system runs incorrectly. Some CPU overclocking performance is better, but sometimes there will be some inexplicable errors. (It is recommended that you must do a good job of cooling when the CPU is overclocked. It is best to install a large fan and add some heat dissipation materials such as silicone. )
Second, the memory module is incompatible or damaged, resulting in operational errors.
This is the most intuitive phenomenon, because this phenomenon can often be seen as soon as it is turned on, and the computer can't start at all. The screen prompts that there is something wrong with the memory, asking whether to continue. This error is caused by physical damage of memory or incompatibility of memory with other hardware. At this time, only another memory was changed.
Third, being attacked by unknown programs or viruses.
As long as we encounter this phenomenon when surfing the Internet, we may expose our IP and be attacked by hackers with some software when surfing the Internet, especially when entering some BBS stations. In this case, it is best to install some defense software on your computer. Then there is the security settings when logging in to public places such as BBS, so that you can hide your IP.
Fourth, the bloated system.
For example, there are too many application software installed on Windows98 system, especially those applications that start with the system, and the blue screen often appears when the system starts. This situation is mostly due to the memory conflict of application * * *! So you'd better not add the application to the startup group.
5. The CD-ROM drive opens abnormally when reading the disc.
This phenomenon is that the CD-ROM drive is turned on by mistake when reading data, resulting in a blue screen. This problem does not affect the normal operation of the system, just eject the CD or press ESC.
The above is a common situation, and there may be other inexplicable problems that lead to the blue screen of the computer. In any case, after encountering such a problem, we should carefully analyze the causes of the problem and then start to solve it. I hope the above points can help my friends.