PS creates a photo-to-poster effect
Final effect
Tools/raw materials
computer
Photoshop software
source
Steps/methods
First, open a photo material that needs to be converted into a poster effect, execute CTRL+ALT+~ to bring up the highlighted selection area, then perform reverse selection, execute CTRL+J to copy the content of the selection area, and set the blending mode of the copied layer to color filtering.
Second, in order to further highlight this photo, we will copy the layer copied in the previous step.
3. Create a new layer, execute CTRL+ALT+SHIFT+E to stamp the visible layer, then add a mask to the stamped layer, then hide the layer 1 and copy the layer, and then use the black brush tool to smear people and the sky in layer mask.
4. Click the "New Fill or Adjust Layer" button at the bottom of the layer panel, and choose to create a color balance adjustment layer, with the middle tone set to -29, 0,-19; Then use the black brush tool to smear the ground where the characters stand on the mask.
5. Then create a hue/saturation adjustment layer and set the parameters to -28, -23 and 0 in the blue state. Used to change the color of the sky, because the color saturation of the sky is high
Sixth, create a curve adjustment layer to brighten the picture of the photo, and then use the black brush tool to smear the people and photos around the mask to form a dark corner effect.
7. Create a new layer, stamp it, perform filter-rendering-lighting effect, and then Wang Jie layer mask, use the black brush tool to smear the areas that don't need lighting effect.
Eight, create a new layer, set the mode of this layer to positive superposition, then pull out a radial gradient, add a mask, and use the black brush tool to smear out the places that don't need to be clear.
9. Copy the layer created in step 8 to enhance the dark corners.
X create a brightness/contrast adjustment layer with brightness of-14 and contrast of +5.
1 1. Create a new layer and stamp it, sharpen the image with the plug-in filter Topaz, and then blur the sky with the blur tool. Reduce the highlight and sky noise of the picture.
12. Create a new layer and stamp it, perform image-adjustment-automatic coloring, and then edit-fade in and out.
13. Create a tone adjustment layer to further enhance the contrast. The input tone is 25,1.25,250. Continue to strengthen the picture contrast effect.
How to make a poster Want to learn simple PS Make a simple poster with colorful characters with PS. The specific steps are as follows:
1. First, open Photoshop and import the portrait. In general, the imported image will be retouched to make the shading and color effects of the image more vivid. Here, select "Image, Adjustment, Brightness/Contrast" to increase brightness and contrast.
2. Execute the menu "Select, Color Range" and select dark tones.
3. After selecting the shadow part of the image, press "Ctrl+J" to copy the shadow part to the new layer, select the original portrait layer, and then proceed to "Selection and Color Range", this time selecting the middle tone.
4. After selecting the midtone range, press "Ctrl+J" to copy to the new layer.
5. Select the magic wand tool. On the original portrait layer, choose the blue hat and the highlights of the hair. Then press "Ctrl+J" to copy the selected part to the new layer. Police tactical unit and the highlights of hair are the most important features of the characters. Just now, there was no choice for dark and alto, so I'd like to add it here.
6. After the foundation layer is completed, the middle tone layer, hair and hat are merged into one layer and named as "middle tone". Dark tones are named "dark tones". The display of the original portrait layer is cancelled.
7. Portrait combination is completed, and printing effect production is started. Press "Ctrl+N" to create a new canvas, with the width and height set to 1 1 inch * 17 inch, and the resolution is 300 to ensure the printing accuracy. The printing effect of the tutorial can be used not only for this poster production, but also for postcards and word cards.
8. Paste the midtone layer and the dark tone layer into the new canvas, select the two layers together, press "Ctrl+T" to bring up the free transformation menu, and then press Shift to reduce the layers proportionally.
9. Select the dark tone layer that has just been adjusted and perform "Edit Fill". Use black, change the blending mode to normal, and the opacity is 100%. Check to keep the transparent area, also fill the middle tone layer, and choose 50% gray as the color.
10, which completes the effect of the two layers after the above two fillings.
1 1. Select two layers, middle tone and dark tone, and right-click to select the merged layer. A brush that produces a printing effect. Creates a new canvas with a larger width and height, but the resolution is the default. Select the text tool, type different layers, adjust their sizes and fonts to make them different, and then set the color of the text to black.
12. Select all text layers, right-click and select Rasterization to change the text from editable state to pixel image, that is, it can no longer be edited, so make sure the size and font of the text meet your requirements. Make the raster text layer into a brush. Turn off the text layer and leave only one layer. Perform Edit and Customize Brushes and name the brushes as needed.
13, and so on, other text layers are still set as brushes, and only one text layer is displayed when setting. After setting, you can find the brush style you just saved from the brush preset.
14, after the brush is set, do the poster design. Select the brush tool and press F5 to bring up the brush setting menu. Select a text brush, check and adjust the shape of the brush tip, set the diameter to 220 pixels, the angle to 0, and the spacing to 494%. The diameter, angle and spacing can be adjusted as required.
15. Set the stroke type and parameters, press "Ctrl+Shift+N" to create a new layer, and then draw various random characters on the layer according to your own preferences.
16. Fill the surface with other strokes as shown below. Don't worry about drawing too much in the process of painting. The following will be modified accordingly. For subtle positions such as facial features, it is necessary to reduce the brush diameter and carefully outline the facial features along the original portrait. After adjustment and modification.
17, at this point, a bit decent. Continue to press "Ctrl+Shift+N" to create a new layer, fill it with white with the paint bucket tool, then move the white layer between the brush layer and the middle-dark tone layer, close the text brush layer and the white layer (key), click to select the middle-dark tone layer, press "Ctrl+A" to select the whole canvas, and then press "Ctrl+C" to copy the currently selected area.
18. Display the text brush layer and white layer that have just been closed, select the text brush layer, click the small button in the layer panel, and add the layer mask. Hold down Alt and click the thumbnail of layer mask, and the canvas will turn white. Then press Ctrl+V to paste the copied area of the medium dark tone layer.
19. Press "Ctrl+D" to cancel the current selection, and then press "Ctrl+I" to reverse the selection. Click on the thumbnail of the text brush layer, and you will see the portrait of the text printing effect.
20, the following is about to color the portrait! First, double-click the text printing layer, check the gradient overlay in the layer style, set the gradient color to your favorite 3-5 colors, choose a good color, and press OK, and the beautiful poster design effect will come out.
I praised it and stepped on it.
Ps poster making tutorial and picture PS poster making tutorial are as follows:
Computer: Huawei notebook.
System: win 10.
Software: PS.
1. Open the software PS, create a new A4 canvas, add the material background and basketball, freely change and adjust the size and position through Ctrl+T, adjust the saturation of the basketball's Ctrl+U hue, and create a clipping mask through CTRL+ALT+G, as shown in the figure.
2.Shift+Ctrl+Alt+N creates a new layer, and Ctrl+Alt+G creates a clipping mask. Use the brush tool and the eyedropper tool to adjust the color details of the picture. The layer mode is superposition, adjust the Ctrl+M curve of basketball. The parameters are shown in the figure.
3. Add a material hand, copy the hand layer with Ctrl+J, freely transform and adjust the size and position with Ctrl+T, adjust the color details of the hand with the brush tool and the eyedropper tool, create a clipping mask with Ctrl+Alt+G, and adjust the Ctrl+U hue saturation of the whole picture. The parameters are shown in the figure.
4. Add materials such as city and storm, freely change the size and position with Ctrl+T, adjust the opacity of the city layer to 70%, add a mask, and adjust the color details of the picture with brush tool and eyedropper tool, as shown in the figure.
5. Add a solid color layer, adjust the fill color, the opacity is 50%, and the layer mode is soft light, as shown in the figure.
6. Add material clouds, birds and figures, adjust the fill color, and freely change the size and position through Ctrl+T, as shown in the figure.
7. Use the brush tool and the straw tool to adjust the color details of the picture. Ctrl+Alt+G creates a clipping mask, Ctrl+J copies the role layer, Ctrl+T freely transforms and adjusts the position, and adds dynamic blur. The parameters are shown in the figure.
8. Adjust and set the Ctrl+U hue saturation of the dynamic fuzzy character layer. The parameters are shown in the figure.
9. Add the material Mars effect and snowflake effect, freely change and adjust the size and position with Ctrl+T, and adjust the color details of the picture with the brush tool and the straw tool, as shown in the figure.
10, add copywriting content, Ctrl+J copy the layer, select Filter-Other-Gao Fancha to keep, the layer mode is linear light, the transparency is 40%, the picture details are improved, and the drawing is completed. The final effect is shown in the figure.