At present, you should consider the following reasons (note that the bios settings in the provided solution need your actual driver confirmation because the product model is not confirmed).

1- Confirm whether the hard disk of the machine is normal. You can boot and click F 10 to enter.

Test the Bios interface, usually under the hard disk for diagnosis.

driver

oneself

test

2- If the hard disk is normal, please confirm whether there is IDE or sata in the bios of the machine before booting up and installing the system.

Mode options, set IDE or turn off sata.

Mode of installing xp

3- The main problem may be the system image or the USB flash drive boot tool and USB flash drive you are using. According to my personal understanding, the use of different USB flash drive boot tools and the compatibility between different brands of USB flash drives and notebook chipsets may lead to the current situation. So you can consider changing USB flash drives, mirrors and tools.

4- Local network card problem, the system has been installed. Considering the problem of bios identification, you can restore the bios default value and then turn off the network card.

Verify whether there is a LAN under bios.

force

Saving, if there is a setting to close it.

Under the widnwos system, open the device manager, expand the network card, plug in the network card, and see if you can identify the network card device after plugging in the network cable. If yes, right-click the network card-Properties-Advanced, there are many values, and set "wake up after shutdown" as shutdown.

If you have any questions and need to know more about HP products, please ask, and we will serve you wholeheartedly.