An adhesive fixing method is often used to fix painted art glass background walls and mirror pattern art glass background walls. Most of these two kinds of background walls are about 5 mm thick and light in weight, and it is more suitable to use structural adhesive to fix them when the background wall has a back plate. The specific operation method can use black structural adhesive to hit the back plate, which is generally a large core plate. Then paste the background wall. In order to prevent the displacement of the glass background wall before solidification, auxiliary methods such as adhesive tape and jacking can be used to fix the position. It can be removed after the structural adhesive is completely cured. Two-wood frame fixing method In this fixing method, most of them are thin glass background walls. Its load-bearing completely falls on the surrounding wooden frame. In the production of background wall, the pattern is divided into several pieces of glass, and each piece of glass is equipped with a wooden frame. When fixing, the wooden frame is fixed in the specified position by pulling the bracket up and down. The construction and installation are more convenient. Three-mirror nail fixing method is mostly used for frameless artistic glass background wall or heavy artistic glass background wall. The height and length of a single piece of glass are one and a half meters. If this limit is exceeded, it is necessary to drill three mirror nail holes in three equal parts in advance. If it is less than 1.5 meters, drill two mirror nail holes in advance. When fixing, drill holes in the back plate or wall in advance at the designated position of the mirror nail hole. Put it in an expansion tube. Then fix the upper wall glass with mirror nail screws. This fixing method is more beautiful. The bearing capacity is large, which is suitable for fixing the artistic glass background wall with large area and thickness. Fourthly, the combination of gluing and mirror nail fixation is rarely used. Generally speaking, unless the glass is too heavy and thick, one of them can solve the problem alone. When in use, first punch the expansion tube on the back plate, then stick the glass, and then fix the mirror nail. In the case of displacement, jacking can also be used to assist fixation. The above four methods are commonly used to fix the artistic glass background wall. There are also some special-shaped glass fixing, and the fixing method of outdoor glass will be discussed separately. I hope everyone can choose a reasonable way to fix the artistic glass background wall according to their actual situation when decorating their homes.