Sweating horse treadmill is a kind of equipment that we often use in our daily life, which can play a role in losing weight and improving health. However, in daily use, it is inevitable to encounter some fault problems, which will be manifested as different fault codes. The following are some common fault codes of Hanma treadmill and their reasons.

1.E0 1: Friction lamp failure. This fault code is usually caused by the failure of the transmission system of the treadmill. At this point, the transmission system needs to be inspected and repaired.

2.E02: Motor communication failure. This fault code may be due to communication problems between the motor and the motherboard, so it is necessary to check whether the motor circuit and the motherboard circuit are damaged or loose.

3.E03: Speed sensor failure. This fault code occurs when the speed sensor of the treadmill is damaged and needs to be replaced or repaired.

4.E04: Motor overload fault. This fault code is usually caused by the overload of the motor of the treadmill, so it is necessary to clean the motor and transmission system or replace the motor parts.

5.E05: Motor protection failure. This fault code will appear when the motor protection system of the treadmill detects overheating or abnormal load, and corresponding measures need to be taken for maintenance.

In the daily use of treadmills, trouble codes sometimes appear, but as long as you pay attention to maintenance, you can generally avoid or minimize the trouble codes, thus prolonging the service life of treadmills.