The processing method of three identical blocks is the most flexible. First of all, the most commonly used treatment methods are as follows:

The advantage of this is that it leads to a single elimination and exposes a color block that can be used for the next three blocks. This can successfully reduce the number of your blocks and increase the chances of making UC. However ... this method has a small disadvantage, that is, it increases the trouble of making AC.

If the exposed monochrome block is another color, you can place [NEW] as follows.

In this way, two companies have been formed, and one is missing, which is very beneficial.

If there is no good place below, but there is a large open space, it must be placed like this:

There are too many benefits, which can form this form with the following three pieces:

After this formation, if a double-color block is added, it can be eliminated in a single and chain way, and completing this alone has also created an AC that makes the gods cry. ....

Of course, if these three pieces are more than two pieces, they can also be placed according to this idea.

This can cause a single cancellation chain to cancel 5, and then connect AC, so there is another AC weapon (thanks to tonyunreal of TGFC for providing ideas)

If two consecutive three-in-one pieces are not the same color, in addition to waiting for the opportunity above, these two three-in-one pieces with different colors also have a good treatment method, as shown in the following figure: [New]

That's all the tee blocks. In fact, the three-way block is the most flexible of all the descending blocks. It can be combined with two-color block and plum blossom block to form a variety of styles of play, among which there are many killers of AC and UC. You can see the mystery in the explanation of the puzzle mode later.

Lesson 2: How to deal with plum blossom blocks

For the most annoying plum blossom block, it is actually extremely simple to handle.

The best solution is as follows, which not only caused two companies, but also formed the lack of one.

What if there is another plum blossom block? That's great. In this way, the more clubs, the better, because ...

In this way, the lack just caused becomes a single elimination and a single elimination linkage, and finally the screen is left.

This provides an excellent habitat for the next plum blossom block.

If there is no such place below for the plum blossom block to land, only a single O or X, it must be placed like this:

In this way, two couplets are formed, avoiding the plum blossom shape, which is beneficial to the treatment method of gem blocks to be discussed later.

Lesson 3: Processing method of two-color block

Theoretically, the two-color block refers to a recommended placement method, which is put on a plane and placed in the following directions.

This has several advantages. First, it can form a single offset chain with the next two-color block, and second, it can provide an excellent placement position for the plum blossom block.

In addition, if the next two-color block is placed like this:

This is very beneficial for forming N junction and UC using gem blocks.

Of course, the interlocking mode of the two-color block itself is not limited to the horizontal direction, and the vertical direction is also feasible, as shown in the following figure: [Add]

Lesson 4: Treatment of Gem Block (Superior Direction)

First of all, it is necessary to explain the elimination rules of gem blocks:

When the single elimination (or n elimination) contains a gem cube, all the same color blocks (colors of the same elimination blocks) connected with the single elimination (or n elimination) will be eliminated after the rhythm line. Note that the significance of this connection is infinite, that is, as long as you connect them, you can eliminate as many blocks of the same color as possible.

Gem blocks will appear randomly after playing the game for a period of time. At this time, the first thing you have to do is to "expose" the gem block alone, and you can't destroy it together with other blocks (unless you have connected a large number of blocks of the same color, and put and destroy the gem block in advance).

Then what you have to do is to connect the blockchain of the same color with the gem block as much as possible, remove the unconnected places and rebuild. This is a high-risk and high-return process. If you are not proficient in this game, you don't have to take the risk, just click here.

In addition, there is a super superior lumines high-speed breaking method, which is always ready for the arrival of the next gem block, so that every time you place a gem block, you can do UC or even AC with a full-screen achromatic block. This idea is only feasible in theory, but it depends on your luck to implement it ...

Lesson 5: jigsaw puzzle mode clearance

As an old rule, we should first discuss the principle: except for a few special graphics and special elimination requirements, most graphics manufacturing can be solved according to this principle. Cut the figures according to every four squares and observe what kind of descending blocks they are made of, and then wait for the required descending blocks to be placed in turn when dealing with specific problems.

For example, make the following figure:

You can divide it like this:

After division, it's very simple. Just wait for the pieces to appear in the game, and don't throw them aside to get cold. Note that the block in the lower right corner is used to support the block above.

In the later stage of the puzzle, the front X2 is placed on the far right of the screen, and the left side is used to place the unused descending block. At the same time, eliminate the falling block on the left as much as possible, and reserve enough space for the next puzzle.

The following are the answers to some specific difficulties in the puzzle mode. Note: Although the answers are all good, they will deprive you of the fun of the game, so the following contents must be your reference after you are puzzled, or you have solved them, but you can see how these methods are different from what you have done. If you have a better idea, welcome to discuss.

Recommended construction method of 4X4 grid: [New]

First build the shape as shown in the figure below (it is easy to build), then wait for three pieces. When the rhythm line is near this position, place it as shown in the figure below:

Then quickly put a two-color block or three-color block as shown in the figure before the arrival of the next rhythm line:

Recommended elimination method: [New]

First build the shape as shown in the figure below, and then wait for the two-color block to be placed in the position as shown in the figure:

For the puzzle of 20 eliminating X2, we can think of it as completing 40 eliminating at one time, so it is very simple. Just use a gem to explode 40 squares at a time.

Recommendation method of AC: [New]

This puzzle seems to be quite difficult, but it is not as difficult as expected. The reason is that the type and order of each block reduction are the same. We just need to develop a method to realize AC. The method recommended below can solve a single AC puzzle and ACX2 puzzle at one time. The steps are as follows:

After the above, the single AC is realized. However, since the next descending block is a solid color block, it is finished again after descending.

Finally, talk about the ingenious solution to the X2 puzzle. [new]

Although the X2 puzzle was mentioned earlier, the first modeling should be placed on the far right (the far left) as far as possible, leaving enough space for the second modeling as much as possible. But because some shapes are "overbearing", there is too much horizontal space. What do we do? Below I will introduce a method of drilling rhythm lines, eliminate the loopholes in box judgment, and easily complete two modeling:

For example, modeling a crocodile puzzle that is more "overbearing":

First build the shape as shown below, and then wait for the plum blossom block. The next step is the key: the timing of the plum blossom block falling is that the rhythm line goes to the position as shown in the figure:

Then the rhythm line determines that you have completed the crocodile once. You only need to remove the part that the rhythm line has not-the crocodile head, and then you can easily complete the second crocodile modeling by waiting for the next three-piece suit or plum blossom block, as shown in the following figure:

Lesson 6: the customs clearance mode of vs cpu mode and the secret of lumines research.

Actually, I'm embarrassed to talk about this lesson. Smart people will call me shameless, and stupid people will scold me for not saying it earlier. But since you were tortured to death by the last few levels of vs cpu mode when using this method, I'd better tell this secret. Although some people will think that I am low-level, I can pass the VS cpu mode and even reach 99999. ...

Secret release: press the start key to pause every time you put down a released block, and slowly and carefully think about how to put the next or even the last three released blocks, and then press the start key to continue. Put it down, and then start to pause. ...

Secret principle: Although the picture darkens during the pause, you can still see all the square layouts including the drop block (ignore the part covered by the text ...). I believe all the students who have played with the animal keeper know what will happen when the game is paused. ...

No matter how powerful the cpu is, who can control the time factor ... suddenly, the classic line "stop time" = = floated in your ear.

Warning! Doing so will seriously destroy the greatest charm of the game-music, and you will always only hear the first part of each song. ....

Transfer from PSP area of video game bus forum, hope to help you!