For example, there are four steps to make a face with a new spa machine, namely, removing the dirt on the face, massaging the face to promote the skin to better absorb the essence, smoothing the fine lines and massaging the face-lifting. The steps of using Ruxin spa to make a face are as follows: 1. Install the face guide head, take out the small white glue, squeeze half of it onto the guide head, then evenly apply it to the face, spray moisturizing spray on the metal area on the back of the machine, then press the back of the instrument with four fingers, set it to 1 2 minutes, and apply half of the face. So is the other face. When you're done, you'll find that all the white heads on your face are out. After removing the guide head, clean the guide head with clean water and put it away. 2. Install the clean guide head, squeeze out the small blue glue on half of the guide head, then evenly spread it on the face, spray the spray on the metal area of the fuselage, turn the machine to the second gear for 3 minutes, and then press the other half of the face in the same way. This step is to help the skin open pores, promote absorption, and make the skin more moist. 3. Wear a fine line massage guide, apply anti-wrinkle products around the eyes and places with fine lines, spray the spray on the metal area behind the fuselage, and set it to the third gear. Massage the place with fine lines repeatedly, and adjust the massage time for half face to 5 minutes. This step can fade fine lines. 4. Put on the face-lifting massage guide rail, apply large blue glue on the guide rail, spray the spray on the metal area behind the fuselage, set it to the fourth gear, and start to massage along the cheeks and neck. This step will make people feel tired and face-lifting.