1, wire rope jump ship.

2. Poor assembly (under normal circumstances, the wire rope at this end of the upper travel switch should be shorter than 0.5mm).

Processing method: 1. The steel wire rope at the pulley position of the installation plate jumps off the boat and is clamped into the pulley groove again; 2. If the wire rope on the motor is changed, all the wire ropes should be taken back and reinstalled; 3. If the wire rope is too long, take back all the wire ropes and cut off the long end. If it still doesn't work, it is recommended to use a hair dryer.

Product overview

Clothes hanger is not only an ornament, but also a functional product. The "function" of clothes hangers has been generally recognized by consumers and has formed an "industry". After several years of running-in, the quality of the industry has gradually stabilized.

In China, "clothes hangers" can also be divided into two types according to product types. One is the "lifting clothes rack" or the so-called "electric clothes rack", which is divided into manual and electric. Manual (manual) is more popular, and electric (intelligent) is the development trend.

The other is the "floor drying rack", which mainly includes airfoil, X-shaped, unipolar and bipolar products. These products are relatively simple, consisting of stainless steel pipes or spray pipes and plastic joints, which are easy to disassemble and do not need special personnel to install, and are deeply loved by residents.