1, ceiling The ceiling of the steaming room can be different from what we usually decorate. The ceiling of the steaming room should be equipped with tent cloth for top insulation, and there are many shapes to choose from. If the Korean sauna room uses more ceiling cloth, there is another kind of Enron sauna room that uses nano-quilts. Besides these two kinds, there are other materials. South Korea can brush energy powder on the ceiling, and the effect is the same if it is painted on the wall. Energy powder and putty powder can be mixed and hung on the ceiling gypsum board. Remember to reserve the position of the lamp line when hanging the ceiling. If you use ceiling cloth, you can fix one side and then tighten it on the opposite side.
2. the wall. After finishing the ceiling of the steaming room, we began to tie the wooden keel frame to fix the wall.
3. spread an electric heating film. After the wooden keel is bound, it is necessary to lay an electric heating film. After paving, it is necessary to connect the thermostat, so that the temperature sensor can be powered on for testing. After testing, there is no problem with the equipment before wall decoration can be carried out.
4. Electric heating film on the ground. It is more troublesome to lay the electric heating film on the ground. The first layer should be paved with extruded board, then with reflective film and finally with electric heating film. If you want to lay tiles, first cover the electric heating film with a special bag, then cover the waterproof layer with a waterproof cloth, and finally you can lay tiles and floors. When pasting tiles, you should mix a lot of energy powder and cement to paste the tiles.