Wood floor maintenance method:
1, the floor needs to be cured for 24 hours after laying, so as not to affect the use effect of the floor.
2. Dust or clean the floor regularly to prevent sand and other hard objects from accumulating and scratching the floor surface. You can put a doormat outside the door to avoid bringing sand or friction dust into the room.
3. Wipe the floor with a wringing mop that doesn't drip, and don't wipe it directly with a wet mop dipped in detergent, so that water will penetrate into the inner layer of the floor through cracks on the surface of the floor, broken paint and corners, causing the floor to warp, mold and rot, and the wax layer can't be completely attached after waxing (white spots appear on the floor bit by bit). Professional cleaning and maintenance products should be used, which can effectively maintain the original moist texture and natural color of the floor, and there is no odor or adhesion after cleaning.
4, local dirt can be cleaned with neutral detergent, it is forbidden to use acidic, alkaline solvents or gasoline and other organic solvents to scrub.
5. In order to keep the wooden floor beautiful and prolong the service life of the paint surface, it is recommended to use special floor wax or wood oil essence for maintenance under the guidance of professionals every year, once every two months or according to the daily use frequency; Avoid using inferior wood oil essence to avoid noise and discoloration.
6, should not be covered with airtight materials or plastic paper, newspapers, etc. for a long time, so as to avoid long-term sticky surface paint film, loss of luster, or local bulging deformation or discoloration.
7. It is forbidden to touch the floor with naked flame or put the high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor.
8. Prevent long-term exposure or sharp rise and fall of indoor temperature. , may cause premature aging of solid wood floor paint surface, making the floor discolored.
9. If the paved place is not used for the time being, it should be ventilated regularly to avoid the floor arching deformation when the humidity is too high in summer and the floor shrinking or cracking in winter.
10, when the indoor humidity is greater than or equal to 80%, it is appropriate to ventilate and exhaust the humidity. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. When the weather is humid and sultry, you can turn on the air conditioner to discharge moisture.
When the indoor humidity is 1 1 and ≤40%, humidification measures should be taken. For example, when heating or floor heating is used in autumn and winter in northern China, the indoor temperature will increase and the humidity will decrease obviously. When the air relative humidity is lower than 30%, the floor will shrink and crack. GB/T 20238-。
12. Avoid scratching the floor by hard objects such as metal sharps, glass, tiles and spikes; Avoid dragging on the floor surface when moving furniture and heavy objects. Furniture feet should be padded.
13, toilet, kitchen and other rooms should avoid water leakage; If you put your feet at the door of a room or bathroom, you should always clean them and keep them dry, so as not to bulge the floor under the mat because of humidity.
65438+
15. The composite floor is used for floor heating environment. According to WB/T 1037—2008 "Laying Technology and Acceptance Standard of Floor Radiant Heating Wood Floor", the suitable temperature of the floor surface is 22℃-28℃, the limit temperature is 32℃, and the room temperature reaches about 22℃ in winter. Use a humidifier to keep the ambient humidity at 40%-.