Advantages: 1 The baseboard is a purely decorative component in home decoration, and heating is necessary for most families. Whether it is wall-mounted heating or floor heating, it will occupy the housing space alone. Although the present wall-mounted heating style is more and more beautiful, it is not enough as a wall decoration, so the combination of pure decoration and pure practicality is bound to be the best choice for home decoration.
2. In terms of air mobility, hot air rises and cold air sinks, and the skirting line is located at the junction of the ground and the wall. If the heat energy really flows with the air from bottom to top, its advantages are similar to floor heating, with small heat loss, and it can radiate heat energy to the indoor surroundings at the same time, with relatively rapid temperature rise and uniform thermal sensation, and it can also avoid the dull feeling caused by poor air fluidity caused by large-scale synchronous bottom-up heat dissipation of floor heating.
3. For the renovation of old houses, plumbing renovation is a labor-intensive work, because most of the pipes are in the wall, and the pipes of * * * are hidden as much as possible in order to achieve beauty. If the cast iron pipe takes too long, we should consider replacing the PVC pipe as a whole, but the original heating is not ideal, so we need to install radiator, which involves the difficult projects such as wall slotting, pipe guarantee and drilling. If we are not careful, we may run into wires. Other projects that need to make holes in the back should also be careful not to hit the heating pipes hidden in the wall, and the skirting heating is likely to avoid these. The pipe itself is a radiator, which is distributed at the bottom of the wall around the room. It only needs drilling and fixing, which greatly reduces the engineering quantity and reduces the construction difficulty and risk.
Disadvantages: 1, the skirting line becomes higher and thicker. Assuming that the installed baseboard heater is really only about 3 cm thick and 12 cm high, it is far from our traditional understanding of baseboard. It is estimated that a considerable number of people are not optimistic from an aesthetic point of view and feel bloated, which is not as simple as the baseboard. In addition, in our general family, each room will have corresponding furniture and electrical appliances for its function. And some large furniture needs to lean against the wall, such as beds, sofa wardrobes and so on. Or you don't need to rely on the wall itself, but the room area is limited or the layout needs it. In addition, China people's traditional concept of room furniture requires that the furniture should be placed neatly against the wall, and the thickness of 3 cm makes these bulky furniture have no backing.
2. Following the first item, the next step is that when these large furniture appliances don't fit the back of the wall, the heating in the back can only dedicate most of the heat to the furniture instead of the owner. In addition, modern decoration pays attention to the integration of everything, and the whole cloakroom, the whole cupboard, the whole bathroom, the whole sofa and the house have been expensive for ordinary families for decades. Several groups of wardrobes will make great contributions to our daily clothes and daily necessities. How many walls will be completely empty before them? Most of them are blocked by walls, and the heating at the bottom is not warm enough on all sides.
3. There will be loss in the process of heat flowing upwards, which is actually a supplement to the second point, but it also shows that the radiator itself is the hottest, and the nearest place is the hottest. Then we have to take into account that in many household appliances, heat energy brought by engine operation needs to be radiated from the bottom or back, such as refrigerators and desktop computers, or some families have to consider washing machines. If they are not only pushed behind the wall, but also raised a fire under their feet, if he is all right, we can't blame others. In addition, some furniture, such as solid wood and bamboo, is easy to crack when the air is dry in winter. If you bake it in the back, the consequences can be imagined.
4. We all know that district heating depends on pressure, so every household will test the heating pressure before installation and annual heating to prevent under-pressure hot water from coming up and heating is not hot. Especially for a residential building, the heating in the lower floor will affect the heating in the upper floor, or it may be because of ignorance of the installation process of the skirting heating, which is also my concern.
To sum up the above points, I personally suggest that you should be cautious when choosing what kind of heating, and consider it in many aspects in combination with your own situation to avoid worries!
Question 2: Which is better, baseboard radiator or floor heating? The comfort of radiator is definitely not as good as floor heating. .
Question 3: How much is the baseboard radiator? How much is it to install the baseboard radiator? It also depends on the brand of radiator you choose. Size, and the material of the radiator. Generally, the installation of radiators is mainly divided into wall-hung boilers, pipes, radiators and labor. These items determine the cost of the radiator. So it's better to have drawings, install your drawings, and make a specific quotation for the radiator scheme, which is more referential. Find Shure floor heating, measure the room for free, make a plan and quote.
Question 4: Do you know anything about the baseboard radiator? There is a new heating method. The heat dissipation of the baseboard radiator is related to the water capacity of the radiator and the water flow speed of the radiator, so it is not that the greater the water capacity of the radiator, the better the heat dissipation effect. I want to know whether you are in the north or the south. There is little demand for heat in the south, and skirting heating is ok, but in the north, Golden Flagship still suggests to choose steel water heating radiator or copper-aluminum composite radiator.
Question 5: Have you ever heard of a skirting radiator? This product is mainly exported to the United States, and it is basically not used in China.
Its products are made of cast iron, the height of which is slightly higher than the skirting line under the wall around the floor of our building, and the length of each piece is about one meter, which is required by customers. Installed at the baseboard position is mainly to occupy less indoor space and beautify it.
At present, there are few domestic manufacturers of this product, and even less are used.
Question 6: Why is skirting heating more energy-saving than traditional floor heating and wall-mounted radiator? 1. First of all, the skirting heating system adopts aviation grade magnesium-aluminum alloy, which is a low-alloyed aluminum-magnesium-silicon system with high heat dissipation rate, much higher than that of steel, so as to ensure that the heat of water in the heating channel can be quickly transferred from the material to the room.
2. The skirting line heating installation is to install a circle at the corner of the room, adopting small water pipe design and annular heating mode. The total heat load configuration is very high, which not only heats up quickly, but also has a very uniform temperature environment, and there will be no uneven cold and hot conditions. Relying on annular radiation heating, the temperature rises fastest, more than three times faster than ordinary radiators. Faster than floor heating 10 times. As soon as the heat source is turned on, all the baseboard radiators will dissipate heat in less than 10 minutes.
3. Because the environmental protection skirting heating system in Yao Peng adopts low-temperature circulating heating, which radiates heat evenly from top to bottom, the surface temperature of the radiator can reach the ideal indoor temperature of about 50 degrees Celsius, which is basically between 18-22 degrees. Energy saving is of great significance.
4. Because radiation heating is adopted, thermal radiation is also the fastest way to conduct heat. Thereby avoiding the problem of wall fumigation caused by heat dissipation flow. As long as the surface temperature of kicking is high, people can feel that the temperature rises rapidly indoors, and a temperature gradient of "up, down and high" will be formed indoors, which is suitable for human health, comfort and warmth.
5. Due to the rapid temperature rise, the skirting line heating combined with the water collector system can realize intermittent heating and grid control, so that people can turn off when they go out and turn it on when they come back, and the skirting line can be found to be hot in 5 minutes, and the ideal temperature can be reached in half an hour. This is convenient, comfortable and energy-saving.
Question 7: Is the baseboard radiator water heating or electric heating? Also, does skirting heating mean skirting radiator? The Borui Star skirting radiator you mentioned belongs to water heating. The heat source is the same as our common wall-mounted radiator and floor heating. It can be a gas-fired wall-hung boiler, a coal-fired boiler, a biomass heating furnace, or urban central heating. The heat source used in each area is different. Central heating is mostly used in the north, gas-fired wall-hung boilers are mostly used in the south, and biomass or coal-fired boilers are mostly used in rural areas.
In addition, the charged skirting line you mentioned refers to the electric heating of the skirting line, which belongs to the type of electric heating. But the style is completely different. How to describe the skirting electric heater? You can search for pictures in Du Niang, and you will understand at a glance. The baseboard radiator is usually used as a baseboard and used as a radiator when heating in winter.
I hope it helps you!
Question 8: What should I pay attention to when installing the skirting radiator in the new house? Pay attention to the position and power matching of the radiator of the baseboard.
Question 9: Why is the baseboard radiator more suitable for you in the heating renovation of old houses? On the advantages of surface heating.
First, come on.
Quick installation-only 1-2 days, without destroying the original decoration.
Fast temperature rise-the set temperature can be reached after 30-40 minutes of opening.
Second, comfort.
Comfortable to use-there is no feeling of air conditioning blowing, or even fever.
Feel comfortable-the air is no longer dry and sleep is more secure.
Third, save energy.
Save energy-turn it on at home and turn it off at work.
Temperature energy saving-the latest temperature control technology makes the temperature setting more reasonable.
Fourth, beautiful.
Beautiful appearance-European steel plate radiator, simple and generous in appearance, integrated with home.
The pipeline is beautiful-the ceiling and the skirting line are not easy to detect, and they are beautiful to hide.
-Comfortable Butler of Yongle Building