Current location - Health Preservation Learning Network - Health preserving recipes - How to clean Vajra Bodhi faster?
How to clean Vajra Bodhi faster?
Enthusiastic netizens

1. King Kong Selection:

To choose King Kong, we must first know the variety of King Kong. The variety of King Kong can be divided into lines, shapes and petals, and the shape of King Kong is closely related to the number of petals. Let's talk about the lines first. There are several lines in King Kong. I can be roughly divided into three main types: 1) fine lines.

2) coarse grains 3) sawtooth grains. The shape of King Kong is generally 5-8 petals round, divided into high piles, short piles and "housekeeper's hat", 9- 12 petals are oval, and 13-23 petals are ingot-shaped. We call him "King Kong Yuanbao", and those with more than 23 petals made of banana rings are called "King Kong Zengmao". If you generally choose a size below 2.0CM, choose your favorite shape. The number of lines and petals is enough (up to 8 petals below 2.0), but it should be noted that slightly thicker lines are colored faster, serrated lines are colored relatively slowly, and fine lines are colored the slowest.

. If you choose more than 2.0CM.

I think one question should be clarified, that is, what is donkey kong's cracking? It should be noted that the minimum water content of all wood and seeds should account for 65,438+05%-20% of their own weight. In other words, the minimum ambient humidity for storage or playing should not be lower than its own humidity. Once the humidity is less than 15%-20%, the seeds will be dehydrated, leading to seed cracking. Many diamond cracks are caused by maintenance problems in the later stage of planting trees. Because the skin and pulp of king kong are similar to walnuts, the only difference is that king kong has natural through holes, which is equivalent to speeding up the pumping speed of king kong seeds and invisibly increasing the proportion of king kong cracking. Therefore, when we choose King Kong, we should understand what we are pursuing. To put it bluntly, you need lines or a head, and you can't be too demanding in other aspects. The choice of King Kong mainly depends on the size of the whole seed. The shape is uniform, the lines are basically the same, and the color difference is not too big.

2. Cleaning and maintenance of King Kong:

How to clean and maintain your favorite King Kong is the key to ensure the quality of your favorite strings in the future. Many players have their own different views and practical experience. I only talk about my own views.

1. Dry chisel: As the name implies, it is to hold it bit by bit with a sharp tool. My tools are two triangular cones, one big and one small. Scrape slurry on the surface of stolen goods with a blade and drill holes with a triangular tip. The advantage of this cleaning is that it is not afraid of oil and water cracking, but it is too hard.

2. Water washing: Soak King Kong directly in water for half a day, and then clean it easily with a hard brush or wire brush. After cleaning, dry in the shade, depending on the color of the surface. Brush it evenly with a fine wool brush immediately. Remember to brush it evenly for several times, then dry the excess oil slick one by one with absorbent paper towels, and then seal it in plastic bags. This cleaning has several advantages: 1) labor-saving, clean and thorough. 2) You can directly observe the color of seeds after soaking. The red color of seeds is reserved for high-density seeds, and the seeds float, and the color will basically not become chaff seeds. If the density is not enough to eliminate, the crack of the diamond itself will be closed and will not crack after sealing. By May, the warm and humid airflow in the air was getting bigger and bigger, and then it was basically taken out for a summer, which basically solved the problem of cracks (the effect of large cracks was not good). The disadvantage is that the temperature is difficult to master and it is easy to cause cracking, so this method is a double-edged sword, so you should be careful when using it.

3. Use oil: Actually, I said that using oil is the cheapest. When you get wet, wipe your hands with glycerin and kaisailu. After being bored for 20 minutes, you can clean it with a hard brush and a wire brush. The advantages are clean and time-saving, and the color and density of seeds can be observed. Good seeds with high density will not be hidden, otherwise they will be eliminated. It also plays the role of crack closure. After cleaning, wipe off the oil slick with a paper towel and seal it. The shortcomings are also obvious. If you buy it at a high price, it will be very painful to be eliminated, so use it with caution.

4. Disk play: As for disk play, I don't want to say more. Everyone should mainly use brushes (preferably dry brushes) to remember the truth of polishing in summer and polishing in winter. There's more cleaning.