1. Add water to the glass pot, dry the water stains on the pot body and bottom, and clean the surface of the heating plate. 2. Turn on the power supply, place the glass jar vertically on the base, and then turn on the power supply. 3. Turn the switch to the set position, and the indicator lights up. When the temperature of the heating plate is higher than the set temperature, the indicator lights up. When the temperature of the heating plate is lower than the set temperature, the indicator lights up. During the heating process, it is normal for the indicator light to turn on and off alternately. Usage:? 1. First, clean the product parts and add 90 ml of purified water to the stainless steel heater.

2. Put the water container, water container card, bottle holder, milk bottle, nipple holder and nipple into the water storage bucket in turn according to the product assembly drawing, and finally cover the transparent cover tightly to ensure the disinfection effect.

3. Plug in the power supply, press the "switch" key, wait for the indicator light to light up, and then start disinfection. Continue disinfection for 8 minutes, and stop automatically after disinfection.

4. Open the transparent cover and take out the bottle to be used with the bottle holder. In order to ensure that other sterilized bottles and accessories are not infected by bacteria, please cover them again and keep them clean and hygienic for next use.