How do you charge for re-threading Yuba in Wuhan bathroom? Many customers often encounter the trouble of threading and wiring when installing Yuba in new houses. In fact, Yuba is generally divided into lamp warm Yuba and wind warm Yuba. Different Yuba decorative materials have different thread leaving standards. Whether you want to renovate the Yuba partially or disassemble it as a whole, you can learn the knowledge of rewiring the Yuba in Wuhan bathroom with Bian Xiao.

First of all, we should know the difference between Wuhan Fengre Yuba and Wuhan Dengre Yuba. According to professional Wuhan introduction, air-cooled Yuba usually reserves five groups of wires, including lighting group, internal circulation blower group, PTC heater group, negative ion group and ventilation group. However, the lamp-heated Yuba will generally reserve four sets of wires, one for lighting, two for lamp heating and one for ventilation. Therefore, when installing Yuba in Wuhan bathroom, you need to know what Yuba you are using, so as to understand the specific installation details.

Wuhan covers a wide range of cities, including Jiang 'an District, Jianghan District, Hekou District, Hanyang District, Wuchang District, Qingshan District, Hongshan District, caidian district, Jiangxia District and Dongxihu District. The charging standards in different regions are different, and the consumption level in urban areas is higher than that in suburbs. So how do you charge for wearing Yuba again in Wuhan bathroom?

Yuba sold in Wuhan market is mainly divided into four categories, namely traditional light bulb Yuba, PTC warm air Yuba, ordinary carbon fiber Yuba and far infrared Yuba. Among them, the price of traditional bulb Yuba is lower, generally below 220 yuan/Taiwan, and the price of PTC warm-air Yuba is slightly higher, generally around 250-450 yuan. Ordinary carbon fiber Yuba and far infrared Yuba are both high-tech products, and the price will be higher than the first two. (Price source network, for reference only)

If you think the charge is too high, you can try threading yourself. Re-threading Wuhan bathroom to install Yuba requires unscrewing all light bulbs, then loosening the spring from the ring of the mask, taking off the mask and wiring. One end of the interactive connecting wire is connected with the switch panel, and the other end is pulled out from the ceiling with the power cord. Open the terminal cover on the box, connect the wires according to the wiring diagram and terminal marks, cover the terminal cover, and fix the terminal cover with screws. Have you learned everything?