Subject: 20 10 business examination outline for engineering and technical personnel of highway and waterway test and detection.
The first part is an overview
The purpose of highway engineering tester examination is to scientifically, openly, fairly and justly assess the technical level of highway engineering testers, improve the overall basic quality and professional technical level of the strict inspection team, and ensure the quality of highway engineering test and detection work.
This examination syllabus divides the knowledge and ability that examiners should possess into three levels: understanding, familiarity and mastery.
The examination of highway engineering test inspectors is divided into two grades: testing engineer and test inspectors. The examination subjects of test and detection engineers are divided into "public foundation" subjects and professional subjects, and the examination subjects of test and detection engineers are only professional subjects. The setting and scope of the two professional examination subjects are the same, but the difficulty of the examination content is different. Testing engineer mainly focuses on mastering strong theoretical knowledge and analytical judgment ability, and the test inspectors mainly focus on the on-site operation skills that should be understood. The examination method is computer test or written test.
First, the test questions
There are four kinds of exam questions: multiple-choice questions, true or false questions, multiple-choice questions and question-and-answer questions. There is no question and answer for public basic subjects.
(1) Multiple-choice questions: each question has four options, and the reference personnel are required to choose the only correct answer from the four options through the examination and understanding of the stem of the question, and each question is 1 point.
(2) True or false questions: each question lists a possible fact, and gives a judgment of whether the fact is right or wrong through examination, with each question 1 point.
(3) Multiple choice questions: There are two or more correct answers in the options listed in each question, with 2 points for each question. If all the options are correct, get full marks; If the option is correct, get a proportional score; If the option is wrong, the question will not be scored.
⑷ Question and answer: divided into experimental operation questions, short answer questions, case analysis questions and calculation questions, with 10 for each question.
Second, the subject setting
Set up 30 multiple-choice questions, 20 true-false questions and multiple-choice questions, the total score is 100, 60 points are qualified, and the examination time is 90 minutes.
Professional subjects are divided into: materials, highways, bridges, tunnels, traffic safety facilities, mechanical and electrical engineering. Each set of papers has 30 multiple-choice questions, 30 true-false questions, 20 multiple-choice questions and 5 question-and-answer questions. The total score is 150, 90 points are qualified, and the examination time is 150 minutes.
Third, the reference proportion of the examination content
The examination subjects of Public Basis include: 20% of laws and regulations, 30% of metrological certification, and 50% of basic knowledge of inspection and testing.
The examination subjects of materials are: geotechnical test 30%, aggregate 10%, rock 5%, cement and cement concrete 20%, asphalt and asphalt mixture 20%, inorganic binder stabilized material 5%, steel 5% and geosynthetics 5%.
Highway examination subjects include: highway engineering quality inspection and evaluation standard 25%, asphalt mixture and cement concrete 20%, pavement base and base material 20%, subgrade and pavement field test 35%.
The examination subjects of bridges include: 20% of raw materials for bridge engineering, 30% of bridge engineering foundation, 3% of bridge superstructure, and 20% of bridge load test and condition monitoring.
Tunnel examination subjects include: basic knowledge of tunnel 5%, advanced support 10%, excavation 10%, initial support 15%, waterproof and drainage 15%, construction monitoring and measurement 15%, and lining 20%.
Traffic safety facilities examination subjects include: basic knowledge 10%, road traffic signs 10%, road traffic sign reflective film 10%, road traffic marking 10%, road traffic marking paint 10%, and road safety guardrail/kloc.
Mechanical and electrical engineering examination subjects include: basic knowledge 25%, monitoring facilities 20%, communication facilities 20%, charging facilities 15%, low-voltage distribution facilities 5%, lighting facilities 5%, tunnel mechanical and electrical facilities 10%.
The above ratios are for candidates' reference when reviewing, and the scores cannot be distributed strictly in proportion on the test paper.
Fourth, reference materials and reference materials.
The examination syllabus of each subject lists the relevant examination bibliography. It should be emphasized that when the contents in the textbook are inconsistent with the corresponding contents of the current standards and specifications, the contents of the current effective industry and national standards and specifications shall prevail.
Part II Examination Outline for Testers
The first chapter "public * * * foundation"
First, the purpose and requirements of the examination
This part mainly examines the candidates' understanding and familiarity with the basic knowledge of highway and waterway engineering test, measurement certification, test technology and management, such as policies, laws and regulations.
Second, the main examination content
1 laws and regulations
Understanding: Metrology Law, Detailed Rules for the Implementation of Metrology Law, Standardization Law, Product Quality Law, Regulations on Quality Management of Construction Projects, Criteria for Accreditation and Evaluation of Laboratory Qualifications, Administrative Measures for Testing and Testing of Highway and Waterway Projects (Order of Ministry of Communications [2005] 12), Administrative Measures on Implementing Testing and Testing of Highway and Waterway Projects
Familiar with: the provisions of the quality management system of product quality supervision, inspection and testing institutions in metrology law, standardization law, product quality law and construction engineering quality management regulations; Provisions on testing institutions and testing personnel in Chapter IV of Administrative Measures for Testing and Testing of Highway and Waterway Engineering; The main contents of on-site evaluation in determining the grade of highway and waterway engineering test and testing institutions; Classification and application principles of test standards.
Master: the division of level, specialty and category of testing institutions; The validity period of the grade certificate; Provisions on test and detection activities in the Administrative Measures for Test and Detection of Highway and Waterway Engineering (OrderNo. Ministry of Communications [2005] 12) (Chapter III); Classification of the level, specialty and category of testers; Conditions and validity period of obtaining the certificate of highway and waterway test and detection engineer; Handling of examination irregularities; Laboratory management system and post basic functions.
Metrological authentication
Understand: the basic concept of metrological certification; General requirements for testing and calibration laboratory capabilities (gb