The purpose of chlorine removal function of Xiaobaixiong constant temperature milk regulator The chlorine removal function of Xiaobaixiong constant temperature milk regulator is to treat chlorine gas in the process of continuous boiling of water. Parents who need chlorine removal can only use it on the control panel of the machine. Select the chlorine removal option to start chlorine removal.
Is boiled water any kind? Marijuana? Everything can be done, but chlorine removal is not so simple. Xiaobaixiong's unique 5-minute continuous boiling chlorine removal design can reduce chlorine and other pollutants in tap water and make your baby and your drinking water safer.
Chlorine removal characteristics of Xiaobaixiong constant temperature milk regulator 1. 24-hour automatic thermostat system, the gospel of breastfeeding mothers at night. The constant temperature function of the little white bear milk mixer can keep the boiling water at a constant temperature for 24 hours after cooling to the set temperature. This way, you don't have to boil water repeatedly to make milk powder for your baby at night. When the water is cold, you need to pour it again!
2. Boil quickly and dechlorinate at low frequency for 5 minutes to ensure good health and make drinking milk and water healthier and safer;
3. Safety: The white bear churn has the function of electronic temperature sensor to prevent dry burning, temperature controller protection and fuse protection, and the three protection methods are only for safety;
5. A pot is multi-purpose, and Ma Bao can drink hot water 24 hours during pregnancy; When the baby is born, you can use it to wash and warm the milk; When the baby grows up, it can also be used to make tea and coffee for his family; And the whole family can drink hot water at any time in winter;
6. The pot body is made of high-strength silicone glass, which is nontoxic and environment-friendly, and does not contain bisphenol A. Ma Bao can buy it with confidence.
The correct way to boil water is 1. Because of the secondary pollution of transmission and distribution pipelines and water storage tanks, it is not appropriate to directly boil the water stored in tap water pipelines for drinking. Turn on the tap in the morning, let the water flow for 5 ~ 10 minutes, and then boil it for drinking. Tap water can be used to clean floors or toilets. In addition, water can be naturally purified and precipitated in a container, and then boiled for drinking.
2, because the tap water after chlorine disinfection has chlorine smell, so when boiling water in a kettle, it should be when the water is boiling (80? Open the lid and wait for the water to boil before cooking 1? 2 minutes, then turn off the engine. If you can't grasp the time when the water is about to boil, open the lid immediately when the water is about to boil, and then wait 1-2 minutes before turning off the fire.
3, we usually boil water, just kill the microorganisms in the water, boiling water is the best sterilization method. However, microbial excreta in water, especially endotoxin released after pathogenic bacteria are killed, cannot be killed at 100℃, so turn off the fire after the water is boiled for 5 minutes.