There is a plastic cover at the root under the handle. Pry open the plastic cover with a small screwdriver and you can see the fixing screws inside. You can remove it by unscrewing the screw with a screwdriver.

Main points of daily maintenance of electric kettle

1. In order to prolong the service life of the electric kettle, the mineral deposits in the electric kettle should be cleaned regularly.

2. When cleaning, be sure to disconnect the thermostat of the electric kettle first.

Please don't soak the electric kettle base in it.

4. Pour vinegar and water into the electric kettle according to the ratio of 1: 2, then turn on the power supply, let the electric kettle work and wait for it to jump automatically.

5. Keep the mixed liquid in the electric kettle for 24 hours, then pour out the mixed liquid and put it in clear water to a certain position before working.

6. Pour water will take away the scale and vinegar essence, and finally clean the inside of the electric kettle with clean water, and repeat the above operations if necessary.

7. If the electric kettle breaks down during use, take the kettle out of the heating chassis, pour out the water in the kettle, then let it cool to normal temperature, and then carry out fault detection or cleaning.

8. When using an electric kettle to boil water, the water injected into the kettle should be at least higher than the highest surface of the heater, but it cannot exceed the specified maximum water level line; When using, water must be added first, and then electrified. It is forbidden to add water after electrifying first. In addition, don't use the electric kettle to cook things with acid, alkali and salt, so as not to corrode the kettle body and heater.