Current location - Health Preservation Learning Network - Health preserving class - Brief introduction of cupping
Brief introduction of cupping
Cupping therapy (commonly known as cupping) uses cupping as a tool to exhaust the air in cupping by burning, squeezing and other methods to generate negative pressure, so that cupping can be adsorbed on the body surface specifically.

Cupping (8 pieces)

The parts (affected parts, acupoints) produce extensive stimulation, forming local congestion or congestion, thus achieving the purpose of preventing and treating diseases and strengthening the body. Cupping, like acupuncture, is also a kind of physical therapy, and cupping is one of the best physical therapies. It is an ancient folk medicine and is also suitable for children. Also known as "cupping". There are cupping, gas tanks and so on. Cupping method, also known as "cupping gas", was called "angle method" in ancient times. This is a kind of therapy with cups and jars as tools, which generates negative pressure by heating the air discharged from them, so that it can be sucked on the skin and cause blood stagnation. Ancient doctors used it to suck blood and expel pus when treating sores and abscesses, and later it was extended to medical diseases such as tuberculosis and rheumatism. After the founding of the People's Republic of China, cupping therapy has made new development, further expanding the scope of treatment and becoming an important therapy in acupuncture treatment. Cupping therapy is one of the medical heritages of the motherland, which has been used by the Han people in China for a long time. Ge Hong, a physician in Jin Dynasty, has an emergency prescription for elbow backup.

Baguan health pavilion

, there is a way to record the angle. The so-called horn method is an external treatment method of sucking abscess with hollowed-out animal horns. In the Tang Dynasty, Wang Dao wrote "The Secret of Outer Taiwan", which also introduced the treatment of cupping with bamboo tube. For example, the article says, "Take a big blue three-fingered bamboo tube, leave one end blank, and the headless bamboo tube is as thin as a sword. Boil the tube several times and then heat it. Press on the ink spot of the cage for a long time. Break the corner with a knife and cook it, and it will be yellow and white. Judging from the angle method and cupping with green bamboo tube introduced above, cupping was popular in Jin and Tang dynasties in China. (1) Bamboo tube cupping: Take a solid and mature bamboo tube with one end open.

cupping glass

One end is reserved at the bottom, and the diameter of the tank mouth is 3, 4 and 5 cm, and the length is about 8 ~ 10 cm. Large caliber, used for big waist, big back and big buttocks; Small caliber, used for joints of limbs. As for bamboo cupping, which is not commonly used for a long time, it is too dry and easy to penetrate into the air. Soak in warm water for a few minutes before use, so that the bamboo pot is tight and airtight before use. Bamboo is produced in the south, and bamboo pots are often used. ⑵ Ceramic cupping: Ceramic cupping is made of clay with a round mouth and a big belly, then coated with black glaze or yellow glaze and fired in a kiln. There are several kinds, including large, medium, small and super-small. Ceramic cans are smooth inside and outside, with large pulling force, economical and practical, and are commonly used in rural areas in northern China. ⑶ Glass cupping: It is a traditional Chinese medical care instrument. Production method: Xuzhou is one of the producing areas of glass products. It has a long history. Excellent quality and high purity. The production of glass cupping is based on high temperature glass chain cupping.

Based on melting furnace and pool furnace method. This is an environmentally friendly product. ② Quality: colorless and transparent. Wide wall thickness, smooth and burr-free tank mouth. It feels good. It is made of glass with good heat resistance, with a small mouth, a large cavity and a slightly upturned mouth. There are five models. The advantage of glass jar is that the jar wall is transparent, and the skin changes in cupping area can be observed at any time, so it is most commonly used in clinic. Because it is convenient to observe, it is especially suitable for pricking collaterals and cupping. 5 pieces/set, 5 specifications, with bottom seat. Products have been sold all over the world, praised by foreign businessmen -OK. China is the first "can"! In clinics and hospitals in China, medical staff say "easy to use, good quality." Not fragile. Occasionally falling to the ground is not afraid of bad. " ③ Packaging: 12 Cupping cups of any model are in small packages and corrugated boxes. Each can has a grid and is packed in two layers. Total weight of 5 cans: 50g/",900g/ set, and the quality meets the product standards. Can be exported to wholesale in large quantities. According to your requirements, you can process OEM and customize mold opening tools. We are looking for agents all over the world. ④ Category and specification: the product is divided into: 1.0 colorless cupping. 5 pieces/set, with 5 specifications. There is a top (bottom) seat (the product is shot in natural light. If there is any discrepancy with the real thing, please take the real thing as the standard. ) the specifications of the cup mouth are as follows: (error: +/-2MM) external warp: MM internal diameter: MM height: MM single/weight /g 1:42 (minimum) 30 52 85 250 35 70120 355 43 7614/kloc.

Cups (5)

Smooth, the rubber stopper of the bottle mouth must be kept intact, which is convenient for smearing when smoking. The prior art is made of transparent plastic and is not easy to break. The piston is arranged above, which is convenient for air pumping. 5. Horn jar making: made of horns or horns, etc. The spire is sawed off at the solid part of the corner tip with a saw, and the solid part needs 1 ~ 2 cm, which cannot be sawed through, and is used as the tank bottom. The mouth end should be sawed flat and polished smooth. The length is about 10cm, and the diameter of the tank mouth is 6cm, 5cm and 4cm. Its advantage is durability, but it is rarely used because it is not easy to collect animal horns. [6] Copper cupping: Copper cupping is a traditional cupping for Tibetan and Mongolian doctors. (7) Bian Shi Cupping: It is made of natural Bian Shi in Surabaya by lathe. Because of less raw materials, time-consuming processing and better cupping effect, the cost is relatively high. Now it is used in large beauty salons and health chain institutions.